Betalink K2 Adhesive is two-component adhesive system that offers very short drive-away time in all weather. It can be used primerless on paint and most of the plastics used for trim and spoilers. Safe drive-away time is one hour - 1.5 hours if the ambient temperature is less than 10C. Adhesive and applicator tool sold separately. .

Used by many OEM manufacturers including BMW and MINI, this adhesive offers the following features:

[ ] Extremely easy to use, with no drilling required.
[ ] Long working time.
[ ] Bond lasts for life of the Car under normal driving conditions.
[ ] TUV approved for spoiler bonding.
[ ] Gives you one-hour drive away - car wash safe after 48 hours.

This two-component polyurethane adhesive system cures almost independently of ambient temperature and humidity. Safe drive-away time is one hour - 1.5 hours if the ambient temperature is less than 10C.

The Betalink K2 adhesive requires the special applicator tool - sold separately. This Betalink applicator gun is a high quality commercial grade unit made in the UK.

Make selection.

BetaLink K2 Adhesive kit includes the K2 two-component adhesive, BetaPrime primer, BetaClean surface prep solution, applicators, spatula, sand paper and applicator tips.

NOTE: The NMX8602 Applicator Tool works with the NMX8601 Adhesive - if you source the adhesive elsewhere, it may or may not be compatible with the applicator tool . The applicator tool is not returnable.

For a simpler less expensive solution, see Betalink K1 Adhesive.

THESE ITEMS ARE NOT RETURNABLE.

Betalink K2 Adhesive is two-component adhesive system that offers very short drive-away time in all weather. It can be used primerless on paint and most of the plastics used for trim and spoilers. Safe drive-away time is one hour - 1.5 hours if the ambient temperature is less than 10C.

Used by many OEM manufacturers including BMW and MINI, this adhesive offers the following features:

[ ] Extremely easy to use, with no drilling required.
[ ] Long working time.
[ ] Bond lasts for life of the Car under normal driving conditions.
[ ] TUV approved for spoiler bonding.
[ ] Gives you one-hour drive away - car wash safe after 48 hours.

This two-component polyurethane adhesive system cures almost independently of ambient temperature and humidity. Safe drive-away time is one hour - 1.5 hours if the ambient temperature is less than 10C.

The Betalink K2 adhesive requires the special applicator tool- sold separately. This Betalink applicator gun is a high quality commercial grade unit made in the UK.

NOTE: The NMX8602 Applicator Tool works with this adhesive - if you source the adhesive elsewhere, it may or may not be compatible with the NMX8602 applicator tool. The applicator tool is not returnable.

For the applicator gun, see NMX8602.

For a simpler less expensive solution, see Betalink K1 Adhesive.

THIS ITEM IS NOT RETURNABLE.