MiniMania.com
NEED HELP?

Currency: 
 Product Search







News Highlights
MagDog Removes Engine Debris

Studies by industry experts, educational institutions, professional associations, and others have consistently determined that very small ferrous debris (often less than 5 microns in size) traveling through a vehicle's lubrication system may cause considerable damage to engine wear-sensitive surfaces.
Read more...

Improving Your Mini Cooper Gas Mileage

by Don Racine
Most engines (and all Minis) use an electric spark to start the burning of the fuel/air mixture which in turn powers the car. If the engine is to run properly this 'electric spark' must happen at the exact right time.
Read more...

SprintBooster - Improve Throttle Response in your "Other" Vehicle.

SprintBooster changes the throttle response in the low to mid rpm range where cars spend a majority of their time. As a result, your car feels peppier and more powerful.
Read more...

Mini Cooper Verto Clutch Information

This article has been written owing to the increasing amount of people who ring Mini Spares stating that their 1275cc Injection type Mini will not start after fitting a new clutch, especially when they have purchased the parts from another supplier, usually a motor factoring company, rather than a Mini specialist.. There are 2 types of Pressure plates, namely AP (Automotive Products) and Valeo.
Read more...

 Newsletter Sign Up

Resources

Chapter Quick Navigation: 
Prev Page Return to TOC Next Page
Front Rubber Cone Spring Suspension ( Known as Dry Suspension ) - Chapter 8 Pages 8-9
Mini Catalog Page 8-9

Front Rubber Cone Spring Suspension ( Known as Dry Suspension )

No. Part No. Description Qty Remarks
0 21A1091  Tie rod , pair, heavy duty adjustable  1 Not shown  
1 442001  KYB standard replacement  2  
1 GSA388  Genuine Unipart  2  
10 AJD7162  Washer to retain shock absorber bush/ferrule  8  
11 2A4332  Bump stop, early two-bolt  2  
12 FAM2764  Single bolt bump stop mounted subframe  2 1976 on  
13 FAM2767  Packing washer for FAM2764  2  
14 GHF331  Spring washer  37656  
15 GHF200  Nut for bump stop  37656  
16 21A530  Suspension cone strut (trumpet)  2  
17 GSV1118  Suspension knuckle  2 Genuine  
17 21A1163  Suspension knuckle  2 Aftermarket  
17 GSV1188  Suspension knuckle 1992-on  2  
18 21A423  Nylon cup  2 Part of  
19 21A425  Dust cover  2 GSV1128  
2 21A1230  Shock absorber bush, was 21A503  4  
20 FAM3968  Suspension rubber cone spring  2  
21 2A4325  Upper arm support shaft  2 Available as kit MSK1 per side  
22 2A4326  Thrust collar  2  
23 2A7324  Thrust washer  2  
24 2A7327  Rubber sealing ring  4  
25 2A4327  Retaining plate  2  
26 GHF335  Spring washer was LWZ308  4  
27 FNZ508  Nut  4  
28 21A1889  Lower arm support shaft  2  
29 21A1882  Lower arm bushes with metal insert  4 Tapered hole in arm  
29 WB2  Lower arm bush, set of four, polyeurethane  1 Tapered hole in arm  
29 2A4294  Lower arm shouldered bush, pre 1965  4 Straight hole in arm  
29 WB1  Lower arm bush, set of four, polyeurethane  1 Straight hole in arm  
3 21A504  Sleeve for shock absorber bush  4  
30 GHF333  Srping washer  2  
31 FNZ506  GHF223 nut for support shaft was FNZ506  2  
32 21A450  Tie rod  2  
33 53K1031  Tie rod bolt  2  
34 GHF332  Washer  2  
35 FNZ505  Nut  2  
36 31G1155  Tie rod bush  4  
36 C-STR628  Tie rod bush, set of four, slightly harder  1  
36 WB3  Tie rod bush, set of four, polyeurethane  1  
37 ACA9759  Cup washer  2  
38 PWZ207  Plain washer  2  
39 GHF223  Nut  2  
4 C-AJJ3361  Lower shock absorber anchor pin, strenghtened  2  
4 2A4337  Lower shock pin  2  
40 2A4267  Rebound buffer  2  
41 13H2776  Screw  2  
42 21A1845  Packing washer to raise suspension  A/R  
5 21A471  R/H shock absorber upper bracket  1 C-AJJ3359 pair  
6 21A474  L/H shock absorber upper bracket  1 For lowered use  
7 GHF331  Spring washer was LWZ204  8  
8 GHF117  Bolt, bracket to inner wing  8  
9 GHF221  Nylon nut for C-AJJ3361  8  
Prev Page Return to TOC Next Page
 
  Internet Specials!
Click Image for More Information SPRINTBOOSTER STD - FORD FOCUS 04+, VOLVO S40 04+, S70 07+
[More Info]
Click Image for More Information SPRINTBOOSTER PLUS CAMRY 06+, CORROLA 05-06, RAV4 <03, LEX E
[More Info]
Click Image for More Information SPRINTBOOSTER STD TOY CAMRY 06+, CORLA 05-06, RAV4 <03, LEX
[More Info]
Click Image for More Information SPRINTBOOSTER PLUS - TOYOTA YARIS 06+, RAV 4 05+, AURIS 06+
[More Info]
Click Image for More Information SPRINTBOOSTER STD - TOY YARIS 06+, RAV 4 05+, AURIS 06+
[More Info]
Click Image for More Information SPRINTBOOSTER PLUS SUZUKI SWIFT SPORT 06+, TOYOTA TACOMA 06+
[More Info]
Maximize Specials
Mini Cooper Part-NJC10004 A+ DISTRIBUTOR, VACUUM ADVANCE 59D4 This is the last of the Lucas distributors that still used points. The latest model blue points are used as well as the GDC136 distributor cap. Ideal for street use in a stock 1275cc application. Fits [ More Info]

On CLEARANCE: $195.00
List Price: $299.95
 
 
Mini Cooper Part-12G1805E UNLEADED CYLINDER HEAD ASSEMBLED WITH VALVES AND SPRINGS Re-manufactured cylinder head has been set up for unleaded fuel. All new valves, guides and springs assembled and ready to install on your 1275cc engine!

On SALE: $695.00
List Price: $895.00
 
 
Mini Cooper Part-NMA4015 ULTRIK MOBILITY KIT - COMPRESSOR, TIRE SEALANT AND BAG If your little car is not running on run-flat tires and you don't have the space or desire to carry a spare wheel and tire- then this kit is for you! The ULTRIK Mobility Kit contains a 12v compressor [ More Info]

On SALE: $52.95
List Price: $59.95
 
 
Mini Cooper Part-CN5/BLUE ANODISED BLUE CN5 WHEEL LUG NUT For 12" steel wheels and those "mags" using the same taper as the 12" wheel.
Do not use with 10" wheels. For that application, see CN1 and CN4 (or 88G322 for stock lug nuts).

Sold Individ [ More Info]

On CLEARANCE: $1.50
List Price: $2.95
 
 
 
copyright © 2008 MiniMania.com