Classic Mini Cooper Engine & Block 998cc
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | 20754-STD-CO-P | 4 | Flat Top 998 Pistons, County Brand Various oversizes |
| 1 | 20773-STD-EA-P | 4 | 998 Dished Pistons, Nural Brand (was AE) 9.1:1 Compression Various oversizes |
| 1 | RE-A1118-P | 4 | Graham Russell 998 Flat Top Pistons Various oversizes |
| 1 | 22463-STD-EA-P | 4 | Nural Brand Dished 998cc Pistons - Each, 9.75:1 Various oversizes |
| 1 | 22463-STD-P | 1 | Nural Brand Dished 998cc Piston Set, 9.75:1 Various oversizes - Set of Four |
| 2 | R43240-00 | 1 | Ring set for TAM2052 original equipment was BHM1629 Use R43240-STD, Over sizes available |
| 2 | C-STN99-20 | 1 | Ring set for P20950-20 Use R43240-STD, Over sizes available |
| 3 | AEC876 | 1 | Core plug set Use CP7 |
| 4 | 12G3503 | 2 | Core plug for oil galleries |
| 5 | 2K1345 | A/R | Plug for oil release valve 6mm or CDU2601 rivet 6.3mm As required |
| 6 | CAM150 | 4 | Stud 3/8”unc 53/4”long for block rear to head . |
| 7 | CAM151 | 5 | Stud 3/8”unc 4”long for block front to head . |
| 8 | CHS2613 | 2 | Stud 3/8” UNC x 1 5/8” long for oil filter head to block Uses GFK3213 nuts |
| 8 | LYG10008 | 2 | Bolt 3/8"UNC x 1" alternative bolts for oil head |
| 9 | CHS2515 | 2 | Stud 5/16”unc x 1 15/16” long fuel pump to block Uses GFK3212 nuts, also thermostat housing studs |
| 10 | 2A54 | 6 | Dowel for main bearing caps |
| 11 | 1A1964 | 1 | Oil restrictor for camshaft . . . No Longer Available |
| 12 | AEC3046 | 1 | Camshaft liner bearing set Use VPC956 |
| 13 | 12A1910 | 6 | Bolt 7/16”unf x 2 1/2” long main cap to block No Longer Available |
| 14 | ADU3490-P | 1 | High Compression piston sets, flat top with circlips Various oversizes |
| 15 | R39400-00 | 1 | Ring set for ADU3490 and ADU4203 Use R33636-P, Various sizes |
| 16 | CCN210 | 8 | Circlips No Longer Available |
| 17 | 53K2853 | 1 | Plug 1/4”bsp for block drain off . |
| 18 | 6K638 | 1 | Washer for plug |
| 19 | 12G164 | 4 | Liner for piston bore |
| 20 | 12G123 | 2 | Con rod No 2 and 4 for circlip type pistons pre 1988 No Longer Available |
| 20 | 12G126 | 2 | Con rod No 1 and 3 for circlip type pistons pre 1988 No Longer Available |
| 20 | 12A1997 | 2 | Con rod No 2 and 4 for press fit gudgeon pin 1988 on No Longer Available |
| 20 | 12A1999 | 2 | Con rod No 1 and 3 for press fit gudgeon pin 1988 on No Longer Available |
| 21 | CAM6126 | 8 | Con rod bolt (2A660 locktab deleted) No Longer Available |
| 22 | BHM1436 | 1 | Crankshaft No Longer Available |
| 23 | OEM_ROD-P | 1 | Con rod bearing set Various sizes |
| 23 | BI_ROD-P | 1 | Bi-Metal Rod Bearings Various sizes |
| 23 | TRI_ROD-P | 1 | Tri-Metal Rod Bearings Various Sizes |
| 24 | OEM_MAINS1.75-P | 1 | Main Bearing Set, OEM Type Various sizes |
| 24 | TRI_MAINS1.75-P | 1 | Main bearing set, Tri-Metal Various sizes |
| 24 | BI_MAINS1.75-P | 1 | Main bearing set, Bi-Metal Various sizes |
| 25 | VPW81 | 1 | Thrust washers set for crankshaft, Standard |
| 25 | VPW81-005 | 1 | Thrust washers set for crankshaft, +.005" |
