Classic Mini Cooper A' Plus Blocks 1275 Engines with 12H Engine Number
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | BHM1137 | 1 | Con rod set |
| 2 | 12G1300 | 8 | Con rod bolt, 1300 |
| 2 | C-STR317 | 1 | High strength rod bolt set |
| 3 | 13H5872 | 8 | Con rod nut |
| 4 | CAM6232 | 1 | Crankshaft (rolled radius journals CAM6232 casting) Was BHM1243 |
| 4 | 8G2740 | 1 | Original crank with 12G1505 casting Reground only |
| 5 | 6K836 | 1 | Crankshaft keyway |
| 6 | VP91306 | 1 | Con rod bearing, (8G2553) Available in 10/20/30/40 |
| 7 | VP91120 | 1 | Mains bearing, (8G2301) Available in 10/20/30/40 |
| 8 | VPW41 | 1 | Thrust washer set, (BHM1293) Available in 03/30 thou |
| 9 | 22G1053 | 1 | Primary gear 24 teeth |
| 9 | DAM8890 | 1 | Primary gear 29 teeth (A plus) 12H706AA, 23201 on |
| 10 | DAM8889 | 1 | Bush front |
| 11 | 22G109 | 1 | Bush rear |
| 12 | DAM6490 | 1 | Primary gear shim 2.84-2.89mm (.112-114") These shims are used to |
| 12 | DAM6486 | 1 | Primary gear shim 2.89-2.94mm (.114-116") give the correct end float |
| 12 | DAM6489 | 1 | Primary gear shim 3.04-3.09mm (.120-122") 88G459 for wear. |
| 12 | DAM6487 | 1 | Primary gear shim 2.94-2.99mm (.116-118") of 3-6 thou on the primary |
| 12 | DAM6488 | Primary gear shim 2.99-3.04mm (.118-120") gear. Check 22A319 and |
|
| 13 | 22A319 | 1 | Thrust washer U clip |
| 14 | 88G549 | 1 | Backing ring |
| 15 | AEG523 | 1 | Camshaft |
| 16 | CHM108 | 1 | Oil pump driving flange |
| 17 | AHU2379 | 1 | Camshaft retainer plate |
| 18 | 12G1397 | 1 | Camshaft gear duplex |
| 19 | 12G4337 | 1 | Camshaft gear simplex 12H706AA, 3997 on |
| 20 | 6K629 | 1 | Camshaft nut |
| 21 | 2A759 | 1 | Camshaft locktab |
| 22 | 12G1699 | 1 | Crankshaft gear duplex |
| 23 | 8G725 | 1 | Crankshaft gear simplex 12H706AA, 3997 on |
| 24 | 2H4905 | 1 | Timing chain duplex |
| 25 | 3H2127 | 1 | Timing chain simplex |
| 26 | 6K628 | A/R | Washer to shim crank gear As required |
| 27 | 12G2621 | 1 | Tensioner (only fits 12G2626 front plate) Simplex only |
| 28 | 12G2628 | 1 | Tensioner mounting plate |
| 29 | 12G2629 | 1 | Tensioner pivot pin |
| 30 | 12G619 | 1 | Front plate gasket for AEG161 |
| 31 | AEG161 | 1 | Front plate duplex NLA |
| 31 | 12G2626 | 1 | Front plate simplex 12H706AA, 3997 on |
| 32 | SH605051 | 2 | Screw-plate to crankcase |
| 33 | GHF321 | 2 | Shakeproof Washer (Internal Lock Washer) |
| 34 | AEA687 | 2 | Screw, front plate to mains cap Duplex only |
| 34 | 53K2016 | 2 | Screw, front plate to mains cap Simplex |
| 35 | WKN505 | 1 | Keyway camshaft |
| 36 | 12G4499 | 1 | Distributor drive spindle |
| 37 | 13H2792 | 1 | Distributor housing oil seal |
| 38 | 12A1136 | 1 | Distributor housing |
| 39 | 2A13 | 8 | Cam follower |
| 39 | AEG584 | 8 | Cam follower with oil hole |
| 40 | AEG314 | 8 | Push rod |
