Classic Mini Cooper Primary Gear Train
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | DAM8888 | 1 | Primary Gear 29 teeth 998cc only Standard fitment |
| 1 | DAM8890 | 1 | Primary Gear 29 teeth 1275cc only Standard fitment |
| 1 | DAM9373 | 1 | Primary Gear 30 teeth 1275cc only No Longer Available |
| 2 | DAM8887 | 1 | Inner bush for primary gear 998cc only No Longer Available |
| 2 | DAM8889 | 1 | Inner bush for primary gear 1275cc only |
| 2 | C-AEA3240 | 1 | Floating inner bush for primary gear replaces DAM8889 1275cc only |
| 3 | 22G109 | 1 | Outer bush for primary gear, all types |
| 4 | 22A321 | 1 | Thrust washer 0.110-112”(2.79-2.84mm ) 998cc only |
| 4 | 22A322 | 1 | Thrust washer 0.112-114”(2.84-2.89mm) 998cc only |
| 4 | 22A323 | 1 | Thrust washer 0.114-116”(2.89-2.94mm) 998cc only |
| 4 | 22A324 | 1 | Thrust washer 0.116-118”(2.94-2.99mm) 998cc only |
| 4 | 22A450 | 1 | Thrust washer 0.118-120”(2.99-3.04mm) 998cc only |
| 4 | DAM6490 | 1 | Thrust washer 0.112-114”(2.84-2.89mm) 1275cc only |
| 4 | DAM6486 | 1 | Thrust washer 0.114-116”(2.89-2.94mm) 1275cc only |
| 4 | DAM6487 | 1 | Thrust washer 0.116-118”(2.94-2.99mm) 1275cc only |
| 4 | DAM6488 | 1 | Thrust washer 0.118-120”(2.99-3.04mm) 1275cc only |
| 4 | DAM6489 | 1 | Thrust washer 0.120-122”(3.04-3.09mm) 1275cc only |
| 5 | 22A319 | 1 | U clip thrust washer |
| 6 | 88G549 | 1 | Backing ring |
| 7 | DAM2821 | 1 | Dust shield for clutch oil seal |
| 8 | TUB101310 | 1 | Idler Gear 37 teeth |
| 9 | DAM4822 | 1 | Thrust washer 0.132-133(3.35-3.37mm) |
| 9 | DAM4823 | 1 | Thrust washer 0.134-135(3.40-3.42mm) |
| 9 | DAM4824 | 1 | Thrust washer 0.136-137(3.45-3.47mm) |
| 9 | DAM4825 | 1 | Thrust washer 0.138-139(3.50-3.53mm) |
| 10 | 2A3548 | 1 | Nut for 1st motion shaft drive gear |
| 11 | DAM4000 | 1 | Lockwasher |
| 12 | DAM2925 | 1 | Drive gear for 1st motion shaft 29 teeth |
| 12 | DAM6337 | 1 | Drive gear for 1st motion shaft 28teeth economy version Use U-DAM6337 |
| 13 | AAU8424 | 1 | Bearing and outer track for 1st motion shaft |
| 14 | 2A3643 | 1 | Circlip for outer track to clutch case |
| 15 | CCN110 | 1 | Circlip for bearing to 1st motion shaft |
| 16 | TUK100320 | 2 | Roller bearing |
| NOTE : | Economy version transfer gears were fitted to 12A/G04,JO5,J92 Engine numbers only |
