For high performance engines an efficient crank damper is a necessity to reduce failure for your MINI. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the standard item. The damper ring 12A367 can be bolted directly to the toothed belt crank pulley, or used with the original V-belt crank pulley AEG454.
FITTING INSTRUCTIONS 12A367 TORSIONAL VIBRATION DAMPER RING
This is designed to fit either the original type Cooper ‘S’ crank ‘V’ pulley or tooth belt water pump drive pulley. Each pulley should be balanced with its respective crank assembly. It is strongly advised that each component should be balanced individually and check balanced as an assembly. Failure to do this will cause premature destruction of the damper.
FITTING INSTRUCTIONS 12A367 TORSIONAL VIBRATION DAMPER RING
This is designed to fit either the original type Cooper ‘S’ crank ‘V’ pulley or tooth belt water pump drive pulley. Each pulley should be balanced with its respective crank assembly. It is strongly advised that each component should be balanced individually and check balanced as an assembly. Failure to do this will cause premature destruction of the damper.
For high performance engines an efficient crank damper is a necessity to reduce failure for your MINI. The standard damper commonly used is barely adequate for the standard engine. Mini Spares has reproduced the original "S" damper and pulley-far superior to the standard item. The damper ring 12A367 can be bolted directly to the toothed belt crank pulley, or used with the original V-belt crank pulley AEG454.
FITTING INSTRUCTIONS 12A367 TORSIONAL VIBRATION DAMPER RING
This is designed to fit either the original type Cooper ‘S’ crank ‘V’ pulley or tooth belt water pump drive pulley. Each pulley should be balanced with its respective crank assembly. It is strongly advised that each component should be balanced individually and check balanced as an assembly. Failure to do this will cause premature destruction of the damper.
FITTING INSTRUCTIONS 12A367 TORSIONAL VIBRATION DAMPER RING
This is designed to fit either the original type Cooper ‘S’ crank ‘V’ pulley or tooth belt water pump drive pulley. Each pulley should be balanced with its respective crank assembly. It is strongly advised that each component should be balanced individually and check balanced as an assembly. Failure to do this will cause premature destruction of the damper.
Recommended items for: 12A367
-
Price : $66.63
-
Price : $75.98
-
Price : $12.95
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...