This complete assembly includes 2 shear bolts,lock, ignition switch & barrel assembly and even a spare key. Wiring loom has a four-pin plug; Fitted from MK4 mini (1976 to 1996, and most Canadian models) up to the introduction of the MPi which had air bags fitted and different steering column and switch. MPI cars used QRF100750 switch. These are now a Genuine Minispares item, rather than an aftermarket copy.
Additional key blanks can be ordered as part number AAU8276A.
Question:
I would like to confirm, I have a 1983 Austin Mini, left hand drive.
Will this switch fit, without any modification?
Answer:
It should. I would think this switch could be installed in either direction but normally LHD cars have the ignition switch on the right side. I suppose it depends on the cut out on the column shroud.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
Is this the correct ignition for a 73 and if I want to replace what part should I get?
Answer:
This is more likely the switch you have if it's mounted on the dash: https://www.minimania.com/part/34680/Classic-Austin-Mini-Ignition-Switch-With-Accessory-Position
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
I'm looking for an ignition switch for a 1973 Classic Mini, the one you are showing in your catalog the key faces driver mine the hey is on the side facing passenger, this car is a left hand drive.
Answer:
Sorry to report that the exact switch for you model is no longer available, most people have found a way to use the BHM7107
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
Is it normal that a 1992 austin mini rover ignition and door keys were different keys?
Answer:
Yes, different keys. Doors and boot lid keys should be the same, but the ignition key is different. - Mini Mania
This complete assembly includes 2 shear bolts,lock, ignition switch & barrel assembly and even a spare key. Wiring loom has a four-pin plug; Fitted from MK4 mini (1976 to 1996, and most Canadian models) up to the introduction of the MPi which had air bags fitted and different steering column and switch. MPI cars used QRF100750 switch. These are now a Genuine Minispares item, rather than an aftermarket copy.
Additional key blanks can be ordered as part number AAU8276A.
Question:
I would like to confirm, I have a 1983 Austin Mini, left hand drive.
Will this switch fit, without any modification?
Answer:
It should. I would think this switch could be installed in either direction but normally LHD cars have the ignition switch on the right side. I suppose it depends on the cut out on the column shroud.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
Is this the correct ignition for a 73 and if I want to replace what part should I get?
Answer:
This is more likely the switch you have if it's mounted on the dash: https://www.minimania.com/part/34680/Classic-Austin-Mini-Ignition-Switch-With-Accessory-Position
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
I'm looking for an ignition switch for a 1973 Classic Mini, the one you are showing in your catalog the key faces driver mine the hey is on the side facing passenger, this car is a left hand drive.
Answer:
Sorry to report that the exact switch for you model is no longer available, most people have found a way to use the BHM7107
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
Is it normal that a 1992 austin mini rover ignition and door keys were different keys?
Answer:
Yes, different keys. Doors and boot lid keys should be the same, but the ignition key is different. - Mini Mania
Recommended items for: BHM7107
-
Price : $14.95
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
