× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Adjustable Heim Joint Trailing Arm Set 1/4 Elliptic | Sprite & Midget

Adjustable Heim Joint Trailing Arm Set 1/4 Elliptic | Sprite & Midget

Adjustable Heim Joint Trailing Arm Set 1/4 Elliptic | Sprite & Midget

Adjustable Heim Joint Trailing Arm Set 1/4 Elliptic | Sprite & Midget

Adjustable Heim Joint Trailing Arm Set 1/4 Elliptic | Sprite & Midget
Part No: C-2A7310
$129.98
Qty:
Fits the following:
Sprite & MG Midget

All Bugeyes and the early square nose Sprites (any and all models with quarter elliptic rear springs) use a trailing arm to locate the rear spring. In stock form these arms are rubber mounted and perform several key functions But that's a lot of work for a rubber mounted arm! If you are serious about driving your car you need to upgrade this system. The ultimate answer is heim jointed, adjustable arms! (Rod End is 7/16-20 x 2.125"). You should re-use the factory spacers with these arms - if new spacers are needed see AHA5224.

 The arm provides total control for two of the original functions. And of course to be perfect for two functions (Twist and fore and aft movement), lateral location (side to side) must be provided by added controls such as provided by a Panhard bar!

The heim jointed arms are made of high grade aluminum - light weight and strong! Looks and feels great!

 
 
Question:
Does this set of adj trailing arms take the place of the OEM radius arms/bars and if so, do they fit in place without any fabrication?
Answer:
Yes, they replace the originals without fabrication or modification.

Spridget Mania Tech Team

The Spridget Parts and Accessories Experts

 
 
Recommended items for: C-2A7310
Loading...
Loading...
Loading...
Related Technical Articles:
MG Midget and Sprite Suspension
Created: December 12, 2013
Suspension options available for Austin Healey Sprites and MG Midgets are reviewed.
Spridget Performance Parts
Created: December 12, 2013
Spridget Performance Parts
Quarter-elliptic Alloy Trailing Arms, C-2A7310
Created: January 30, 2000
These trailing arms are designed to bolt on in place of the stock units, allowing adjustability of the driveshaft and positively controlling fore and aft movement of the rear axle assembly.
Loading...
Loading...
Loading...