Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car: 
BMW Mini Cooper
Select
Classic Mini brake conversion kit drum to disc 'S' 7.5 inch

Classic Mini brake conversion kit drum to disc 'S' 7.5 inch

Classic Mini brake conversion kit drum to disc 'S' 7.5 inch
This item is currently not available.
Expected back in stock after Nov-30-2021
$1049.95

No matter how well your Austin or Morris Mini Cooper handles, you still have to stop sometime, and if the car in front of you has ABS you'd better be able to stop your Mini Cooper right now! At one time the only way to get the highly desirable Mini Cooper S disc brakes was to acquire a used set and rebuild them. Now we have this kit to convert any year Austin or Morris Mini or Mini Cooper to S disc brakes. This disc brake conversion kit includes every nut, bolt and component needed, including front suspension uprights, roller wheel bearings, upper and lower ball joints, axle CV joints, disc brake rotors, disc brake drive flanges, two piston stock cast iron Mini Cooper S calipers, etc. All NEW parts, easy bolt-in installation. Does NOT include driveshafts (You can use your old ones).

We recommend one of the Haynes manual if instructions are required. Part # 527 or 646.
Note, this kit includes aftermarket front hubs. Fits cars with 10 inch wheels.

 
 
Question:
I have just purchased a 1964 Austin Mini MkI - I have the 4 wheel drums with the two cylinder front drum type. The vehicle has 10" "Revolution Wheels" 4-spoke. Will this kit work or do I need to measure something to verify?
Answer:
This kit will fit great- no problems, direct replacement will make a big improvement!
 
 
 
 
Question:
Hi, Im looking at a 1993 mini mayfair SPI with 8.4 discs. Do you sell the conversion kits to fit 6x10 inch wheels? Thanks
 
 
 
 
Question:
What size wheels can I use with this kit. ? Are brake lines Included?
Answer:
This kit converts front drums to 7.5" disc brakes. In general, even some 10" wheels will work with these brakes but it's best to see the specs on any 10" wheels you may want to run as the offset has to be the Cooper S type to clear the calipers. Most 12" and 13" wheels will work with the 7.5" calipers.

This kit does not come with brake lines or hoses.
 
 
Recommended items for: C-AJJ4028MS
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Brake Rotors & Drive Flanges page 9
Created: December 28, 2018
See our great selection of every Brake Disc (rotor) as used on the Classic Mini Cooper from 1959 thru 2000. Stock and high performance options for Rotors, Drive Flanges, CV Joints and Brake Pads.
Top 5 Mechanical Upgrades to Modernize a Classic Mini
Created: April 18, 2018
5 Mechanical Upgrades to Turn your Classic Mini into a Modern vehicle.
Loading...
Loading...
Loading...
Recently Viewed Items