MINI Factory Replacement Flange Nuts for the Exhaust Manifold where the Turbo is attached. Set of 4 M8 Flange Nuts.   Studs available separately.

Fits the following Cooper S models:

2007-2013 R56 MINI Cooper S Hardtop
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Tightening Torque
Turbocharger to Exhaust Manifold (M8 nut): 20 Nm

For the studs between the Turbo and Exhaust Downpipe, see G2NME2411.

Fits the following Cooper S models:

2007-2013 R56 MINI Cooper S Hardtop
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

See  the Exhaust Manifold to Cylinder head Gasket / Heat Shield, part G2NME2406.

See the Exhaust Manifold to Turbo Studs, part G2NME2412.

See the Turbo to Downpipe Gasket, part G2NME2402.

See the Downpipe to Exhaust V-Clamp, part G2NME5304.

MINI Factory Replacement STUDS for the Turbo where it attaches to the Exhaust Manifold. Set of 4 Studs. M8 x 25

Fits the following Cooper S models:

2007-2013 R56 MINI Cooper S Hardtop
2008-2014 R55 MINI Cooper S Clubman
2009-2015 R57 MINI Cooper S Convertible
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Tightening torque
N14 Stud to turbocharger (M8 x 25):  15 Nm
N18 Stud bolts to exhaust manifold (M8 x 25):  15 Nm
Screw the studs into the exhaust manifold until the stud height reaches 30mm from the surface of the exhaust manifold 

For the studs between the Turbo and Exhaust Downpipe, see G2NME2411.