Mini Cooper Adjustable Rear Control Arms from H-Sport. Allows precision adjustment of the rear camber for lowered Minis or for Minis driven on the track . Available in one or two Pairs.
One pair will allow rear camber adjustment. Two pairs of these adjustable rear control arms will allow precise and independent adjustment of the rear camber and rear toe.
Fits the following models:
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible
2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2016 R58 MINI Cooper and Cooper S Coupe
2012-2016 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman
Select one or two pairs.
These adjustable rear control arms have an adjustment range from zero to negative four degrees for increased rear grip. Each Link is simply adjusted by loosening the lock nuts and then rotating the hex center for more or less camber.
The Sport Rear Camber Links are designed and tested to suit any street or track environment. Each Link comes fully built from H Sport and is pre-set to the stock length. With the Links pre-set to the stock length, you can then use that camber setting as your new baseline.
Features and Benefits:
- Allows For Precision Rear Alignment
- Corrects Excessive Negative Camber
- Links pre-set to the stock length
- Greasable Bushings
- Perfect for lowered Minis
The Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center. The polyurethane bushings can be greased by utilizing the zerk fittings at each end. Durable, yet highly functional, the Sport Camber Links give you the freedom to set your Mini´s rear camber at any setting.
After the installation of lowering springs or coilover kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.
This Rear Adjustable Control Arm Kit provides a simple, affordable solution to correct excessive negative camber. This kit not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making this kit a necessity for the serious performance tuner.
NOTES: On MINIs with the optional Xenon Headlights - there is a 'level sensor' used by the Xenon Headlights that attaches to the Drivers side Upper Rear Control Arm - these Adjustable Control Arms do not have accommodations for attaching this sensor. Most customers simply us a couple of standard 'hose clamps' to affix the sensor to this arm.
Mini Cooper Adjustable Rear Control Arms from H-Sport. Allows precision adjustment of the rear camber for lowered Minis or for Minis driven on the track . Available in one or two Pairs.
One pair will allow rear camber adjustment. Two pairs of these adjustable rear control arms will allow precise and independent adjustment of the rear camber and rear toe.
Fits the following models:
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible
2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible
2012-2016 R58 MINI Cooper and Cooper S Coupe
2012-2016 R59 MINI Cooper and Cooper S Roadster
2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman
Select one or two pairs.
These adjustable rear control arms have an adjustment range from zero to negative four degrees for increased rear grip. Each Link is simply adjusted by loosening the lock nuts and then rotating the hex center for more or less camber.
The Sport Rear Camber Links are designed and tested to suit any street or track environment. Each Link comes fully built from H Sport and is pre-set to the stock length. With the Links pre-set to the stock length, you can then use that camber setting as your new baseline.
Features and Benefits:
- Allows For Precision Rear Alignment
- Corrects Excessive Negative Camber
- Links pre-set to the stock length
- Greasable Bushings
- Perfect for lowered Minis
The Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center. The polyurethane bushings can be greased by utilizing the zerk fittings at each end. Durable, yet highly functional, the Sport Camber Links give you the freedom to set your Mini´s rear camber at any setting.
After the installation of lowering springs or coilover kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.
This Rear Adjustable Control Arm Kit provides a simple, affordable solution to correct excessive negative camber. This kit not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making this kit a necessity for the serious performance tuner.
NOTES: On MINIs with the optional Xenon Headlights - there is a 'level sensor' used by the Xenon Headlights that attaches to the Drivers side Upper Rear Control Arm - these Adjustable Control Arms do not have accommodations for attaching this sensor. Most customers simply us a couple of standard 'hose clamps' to affix the sensor to this arm.
Loading...
Loading...
Loading...
Loading...
Loading...