Rennline's stainless steel 79mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2009-2015 R57 MINI Cooper and Cooper S Convertible 

See the Application Guide below to see which lengths go with which models.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 120mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

Fits the following models:

2011-2016 R60 MINI Cooper and Cooper S Countryman
2013-2016 R61 MINI Cooper and Cooper S Paceman

See the Application Guide below to see which lengths go with which models.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 133mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

Fits the front of following Mini Cooper non-S models:

2008-2014 R55 MINI Cooper non-S Clubman

See the Application Guide below to see which lengths go with which models.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 96mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

Fits the following models:

2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible 
2012-2015 R58 MINI Cooper and Cooper S Coupe
2012-2015 R59 MINI Cooper and Cooper S Roadster

See the Application Guide below to see which lengths go with which models.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 107mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

Fits the front of following Mini Cooper non-S  models:

2011-2016 R60 MINI Cooper Countryman

See the Application Guide below to see which lengths go with which models.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide: