Custom made Street-Sport Roll Bar for your 3rd generation F56 MINI Hardtop high-performance streetcar with a sunroof. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. The actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models with a sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Street-Sport Roll Bar

• Designed for high performance street use.
• Bolt-in harness mount tube for easy installation of safety harnesses.
• Bolt-In Removable horizontal harness.
• 4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation. Most applications are a true bolt-in and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Race Roll Bar for your 3rd generation F56 MINI Hardtop with sunroof. The race roll bar is designed for solo, autocross and high speed time trials. Race roll bar has a welded diagonal cross brace and harness mount tube. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models with sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Race Roll Bar

• Race roll bars are made with 1.750 x .120 DOM steel.
• Welded cross brace and harness bar.
• 4 point mounting with welded diagonal cross brace.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Race Roll Bar for your 3rd generation F56 MINI Hardtop without sunroof. The race roll bar is designed for solo, autocross and high speed time trials. Race roll bar has a welded diagonal cross brace and harness mount tube. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models without sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Race Roll Bar

• Race roll bars are made with 1.750 x .120 DOM steel.
• Welded cross brace and harness bar.
• 4 point mounting with welded diagonal cross brace.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend this product get painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Full Race Roll Bar for your 3rd generation F56 MINI Hardtop without sunroof. The race roll bar is designed for solo, autocross and high speed time trials. This Race roll bar has the bolt-in diagonal cross brace and harness mount tube. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models without sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Race Roll Bar

• Race roll bars are made with 1.750 x .120 DOM steel.
• Bolt-in cross brace and harness bar.
• 4 point mounting with welded diagonal cross brace.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Full Race Roll Bar for your 3rd generation F56 MINI Hardtop with sunroof. The race roll bar is designed for solo, autocross and high speed time trials. This Race roll bar has the bolt-in diagonal cross brace and harness mount tube. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models with sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Race Roll Bar

• Race roll bars are made with 1.750 x .120 DOM steel.
• Bolt-in cross brace and harness bar.
• 4 point mounting with welded diagonal cross brace.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UPAINTED

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Street Roll Bar for your 3rd generation F56 MINI Hardtop with sunroof, gives your MINI a performance look and style. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. The actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models with a sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Street Roll Bar

• In most cars the rear seat can remain in place and usable
• 4 point roll bar is made of 1.75 x .120 wall DOM mild steel tubing
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation. Most applications are a true bolt-in and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Street Roll Bar for your 3rd generation F56 MINI Hardtop without sunroof, gives your MINI a performance look and style. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models without sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Street Roll Bar

• In most cars the rear seat can remain in place and usable
• 4 point roll bar is made of 1.75 x .120 wall DOM mild steel tubing
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation. Most applications are a true bolt-in and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.

Custom made Street-Sport Roll Bar for your 3rd generation F56 MINI Hardtop high performance street car without sunroof. These Roll Bars meet or exceed the safety requirements for most competition sanctioning organizations. These roll bars have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean, unobtrusive look and feel.

All images are approximations. Actual product may vary from the images.

Images show painted product but the actual product is shipped UNPAINTED.

Fits the following models without sunroof:

2014-2022 F56 MINI Cooper and Cooper S Hardtop

Street-Sport Roll Bar

• Designed for high performance street use.
• Bolt-in harness mount tube for easy installation of safety harnesses.
• Bolt-In Removable horizontal harness.
• 4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
• All necessary installation and mounting hardware with back-up plates is included
• Roll Bar is shipped UNPAINTED.

These Roll Bars are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation and require NO WELDING. 

Serious racing of any sort in a MINI Cooper will require serious protection. "Roll Bar" or "Roll cage" are often required by the race organization. Bolt-In options will meet the standards with minimal effort and can be easily removed.

The "Roll Bar" stops just behind the front seats and is there primarily to prevent the roof from collapsing in the event of a roll-over event. There is no 'cage' to protect the front cabin.

The "Roll Cage" surrounds the front cabin for a more complete protection - the cage extends to the A-pillars and includes a door bar for protection from side impacts.

NOTE:

The Roll Bar is a heavy and bulky product. Expect that the product will have scratches and marks from shipping that will need to be 'cleaned up' before finishing. We recommend you have this product painted or powder coated locally after receiving this product.

These products are 'made-to-order' - allow 4 to 6 weeks for delivery.

Roll Bar and Roll Cage Application Guide

Shipping

Roll Bars are shipped via truck freight:

• Shipping cost to Califorina addresses - approximately $200
• Shipping cost to non-California, continental US addresses - approximately $300
• Shipping cost will vary depending on the actual address.

NOTE: Product is shipped UNPAINTED.