× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following models:

2014-2019 F56 MINI Cooper S Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Sport Performance Tuner (up to 30 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Sport Performance Tuner

DINANTRONICS Sport is the boost controller for the masses. Its simple design/execution allows for easy installation/removal that can be performed in a blink of an eye and yields results you will be sure to feel, and enjoy, from the get go. Coupled with Bluetooth capabilities right out of the box that allows for user controlled adjustability and a live boost monitor to keep track of the action its a value proposition that is unequaled in the marketplace. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Stage 2 Performance Upgrade Kit featuring Dinan Sport and K&N Gen3 MINI Cooper S F56 thru 2019

Stage 2 Performance Upgrade Kit featuring Dinan Sport and K&N Gen3 MINI Cooper S F56 thru 2019

Stage 2 Performance Upgrade Kit featuring Dinan Sport and K&N Gen3 MINI Cooper S F56 thru 2019
Selected: Dinan Sport / K&N Typhoon Intake thru 2019
Part No: G3NMK3020
$1265.99
Qty:
Fits the following:
MINI (2002-Current)
Alternate Products
Mini Cooper Stage 2 Performance Upgrade Kit Gen3 F56 thru 2019
Mini Cooper Stage 2 Performance Upgrade Kit Gen3 F56 thru 2019

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following models:

2014-12/2014 F56 MINI Cooper S Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Elite Performance Tuner (up to 51 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Elite Performance Tuner

The DINANTRONICS Performance Tuner is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture into. It does this without negatively affecting your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device designed to be emissions legal in all 50 states. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque. 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following JCW models:

2014-12/2014 F56 JCW MINI Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Elite Performance Tuner (up to 45 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Elite Performance Tuner

The DINANTRONICS Performance Tuner is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture into. It does this without negatively affecting your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device designed to be emissions legal in all 50 states. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque. 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following JCW models:

2015-2019 F56 JCW MINI Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Elite Performance Tuner (up to 45 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Elite Performance Tuner

The DINANTRONICS Performance Tuner is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture into. It does this without negatively affecting your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device designed to be emissions legal in all 50 states. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque. 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following Cooper S models:

12/2014-2019 F56 MINI Cooper S Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Elite Performance Tuner (up to 51 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Elite Performance Tuner

The DINANTRONICS Performance Tuner is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture into. It does this without negatively affecting your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device designed to be emissions legal in all 50 states. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque. 

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Stage 2 Kit for your 3rd generation F56 MINI Cooper S combines products from Dinan Engineering  and K&N Performance.  These are brands that are synonymous with performance with a long history of delivering the highest quality and reliable solutions.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following models:

2014-2019 F56 MINI Cooper S Hardtop

This kit includes the following:

  • K&N Typhoon Intake (up to 6.5 hp gain)
  • Dinan Sport Performance Tuner (up to 30 hp gain)
  • Dinan Perfromance Exhaust upgrade (up to 4 hp gain)

Several kits to choose from:

  • K&N Intake, Dinan Sport Tuner & Dinan Exhaust
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for Cooper S built after 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built before 12/2014
  • K&N Intake, Dinan Elite Tuner & Dinan Exhaust for JCW built after 12/2014

Select accordingly.

K&N Typhoon Air Intake System

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Dinan Sport Performance Tuner

DINANTRONICS Sport is the boost controller for the masses. Its simple design/execution allows for easy installation/removal that can be performed in a blink of an eye and yields results you will be sure to feel, and enjoy, from the get go. Coupled with Bluetooth capabilities right out of the box that allows for user controlled adjustability and a live boost monitor to keep track of the action its a value proposition that is unequaled in the marketplace. 

Dinan Free-Flow Exhaust

Dinan engineers designed the F56 MINI Cooper S exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Like all Dinan exhausts, our F56 Free Flow Exhaust is engineered to combat low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. 

The system is built with ease in mind and utilizes a simple bolt-on installation with included mounting hardware. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 90 mm ceramic black and laser engraved exhaust tips for a tasteful, high-performance look that yields a maximum performance gain of 4 horsepower and 4 ft-lbs of torque.

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

 

 

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...