× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

NM Engineering’s RED Front Upper Strut Bar - Tie-Bar is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2022 F57 MINI Cooper and Cooper S Convertible

Available in:

  • Black
  • Blue
  • Red

Select accordingly.

This NM Engineering bar will work with ALL Gen 3 MINI Coopers, F56, F55, 2.0T, and 1.5T. The mounting bases and tube ends are machined from solid 6061-T6 aluminum billets, and not some cheap welded together sheet metal pieces. The bar is formed utilizing a 1" round 6061-T6 aluminum tubing with 1/4" thick wall for the perfect balance between stiffness and weight. While others use a single bolt design we use two bolts to solidly secure the tube end to the mounting base. The single bolt mounting still allows the assembly to pivot and skewed, rendering them ineffective against chassis flex, no matter how tight you cinch the bar end bolt.

NOTE: Installation requires holes to be punched through the weather stripping - Punch tool is included in the kit. (See instructions for more details).

See Installation Instructions here.

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57

Mini Cooper Strut Bar Tie Bar Red Gen3 F55 F56 F57
Selected: Red
Part No: G3NMS2104
$415.99
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)
Select variations below for more information:

NM Engineering’s BLUE Front Upper Strut Bar - Tie-Bar is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2022 F57 MINI Cooper and Cooper S Convertible

Available in:

  • Black
  • Blue
  • Red

Select accordingly.

This NM Engineering bar will work with ALL Gen 3 MINI Coopers, F56, F55, 2.0T, and 1.5T. The mounting bases and tube ends are machined from solid 6061-T6 aluminum billets, and not some cheap welded together sheet metal pieces. The bar is formed utilizing a 1" round 6061-T6 aluminum tubing with 1/4" thick wall for the perfect balance between stiffness and weight. While others use a single bolt design we use two bolts to solidly secure the tube end to the mounting base. The single bolt mounting still allows the assembly to pivot and skewed, rendering them ineffective against chassis flex, no matter how tight you cinch the bar end bolt.

NOTE: Installation requires holes to be punched through the weather stripping - Punch tool is included in the kit. (See instructions for more details).

See Installation Instructions here.

NM Engineering’s BLACK Front Upper Strut Bar - Tie-Bar is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2022 F57 MINI Cooper and Cooper S Convertible

Available in:

  • Black
  • Blue
  • Red
Select accordingly.

This NM Engineering bar will work with ALL Gen 3 MINI Coopers, F56, F55, 2.0T, and 1.5T. The mounting bases and tube ends are machined from solid 6061-T6 aluminum billets, and not some cheap welded together sheet metal pieces. The bar is formed utilizing a 1" round 6061-T6 aluminum tubing with 1/4" thick wall for the perfect balance between stiffness and weight. While others use a single bolt design we use two bolts to solidly secure the tube end to the mounting base. The single bolt mounting still allows the assembly to pivot and skewed, rendering them ineffective against chassis flex, no matter how tight you cinch the bar end bolt. 

NOTE: Installation requires holes to be punched through the weather stripping - Punch tool is included in the kit. (See instructions for more details).

See Installation Instructions here.

NM Engineering’s RED Front Upper Strut Bar - Tie-Bar is designed to reinforce the already stellar MINI Cooper chassis. Installation reduces fore and aft, as well as side-to-side chassis flex during spirited driving, which helps to eliminate unwanted geometry/alignment change. This results in better steering response and better handling.

Fits the following models:

2014-2022 F56 MINI Cooper and Cooper S Hardtop
2015-2022 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2022 F57 MINI Cooper and Cooper S Convertible

Available in:

  • Black
  • Blue
  • Red

Select accordingly.

This NM Engineering bar will work with ALL Gen 3 MINI Coopers, F56, F55, 2.0T, and 1.5T. The mounting bases and tube ends are machined from solid 6061-T6 aluminum billets, and not some cheap welded together sheet metal pieces. The bar is formed utilizing a 1" round 6061-T6 aluminum tubing with 1/4" thick wall for the perfect balance between stiffness and weight. While others use a single bolt design we use two bolts to solidly secure the tube end to the mounting base. The single bolt mounting still allows the assembly to pivot and skewed, rendering them ineffective against chassis flex, no matter how tight you cinch the bar end bolt.

NOTE: Installation requires holes to be punched through the weather stripping - Punch tool is included in the kit. (See instructions for more details).

See Installation Instructions here.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...