We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car:
Select
Select
Select
Alternate Products
$32.15
Classic Mini Knuckle Joint Genuine
OEM knuckle joint with spacer as fitted to the front from 1990.
See GSV1118 or 21A163 for rear.
These joints are complete with the knuckle, nylon cup and rubber boot. If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check. If left unchecked, the knuckle can wear through the nylon cup, into the suspension arm, and ruin the casting that supports the knuckle joint. Much cheaper than changing arms.
Sold each.
Same as GSV1264
This knuckle has a spacer (4.3mm) built into it for use on 1275cc 1989 onwards minis.
See GSV1118 or 21A163 for rear.
These joints are complete with the knuckle, nylon cup and rubber boot. If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check. If left unchecked, the knuckle can wear through the nylon cup, into the suspension arm, and ruin the casting that supports the knuckle joint. Much cheaper than changing arms.
Sold each.
Same as GSV1264
This knuckle has a spacer (4.3mm) built into it for use on 1275cc 1989 onwards minis.
OEM knuckle joint with spacer as fitted to the front from 1990.
See GSV1118 or 21A163 for rear.
These joints are complete with the knuckle, nylon cup and rubber boot. If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check. If left unchecked, the knuckle can wear through the nylon cup, into the suspension arm, and ruin the casting that supports the knuckle joint. Much cheaper than changing arms.
Sold each.
Same as GSV1264
This knuckle has a spacer (4.3mm) built into it for use on 1275cc 1989 onwards minis.
See GSV1118 or 21A163 for rear.
These joints are complete with the knuckle, nylon cup and rubber boot. If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check. If left unchecked, the knuckle can wear through the nylon cup, into the suspension arm, and ruin the casting that supports the knuckle joint. Much cheaper than changing arms.
Sold each.
Same as GSV1264
This knuckle has a spacer (4.3mm) built into it for use on 1275cc 1989 onwards minis.
Recommended items for: GSV1188
Also Purchased with: GSV1188
Loading...
Loading...
