× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
The original ultimate engine stabilizer kit fits all 1275cc cylinder heads for left hand drive cars; except those with the thermostat sandwich pad.
This is one of the best options to keep your motor from rocking whether you have a high performance racer or just a good street car.
It fits to the thermostat housing and end manifold stud and also onto the bulkhead where the heater pipes go through.
(For 850, 998, and 1100, see MSSK1000LHD.)
Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive

Classic Austin Mini engine stabilizer kit upper left hand drive
Part No: MSSK1300-LHD
$93.95
Qty:
Fits the following:
Classic Mini
Alternate Products
Engine Stabiliser Waterpump To Bulkhead Kit With Bushes
$73.95 Engine Stabiliser Waterpump To Bulkhead Kit With Bushes
The original ultimate engine stabilizer kit fits all 1275cc cylinder heads for left hand drive cars; except those with the thermostat sandwich pad.
This is one of the best options to keep your motor from rocking whether you have a high performance racer or just a good street car.
It fits to the thermostat housing and end manifold stud and also onto the bulkhead where the heater pipes go through.
(For 850, 998, and 1100, see MSSK1000LHD.)
 
 
Question:
My clutch master cylinder is in the way? Also is there a blanking plate of some sort to block off master cylinder holes on the the other side of right hand drive? Thanks
Answer:
This is designed for LHD models and thus should not have an issue with the clutch master.   The blanking plate part number is ALA6593  https://www.minimania.com/part/ALA6593/Classic-Austin-Mini-Bulkhead-Blanking-Plate-Without-Heater-Hose-Holes

 
 
 
 
Question:
Can you tell me the size of the nuts used to hold the thermostat housing down, and if this a universal size for this part? And is this the same size nut used for the LHD engine stabilizer 3 bolt bulkhead mount? part# MSSK1302. And, can you provide part #s for above mentioned nuts and replacement bushings for this engine steady?
Answer:

The thermostat housing mounts using 5/16" nuts - I am not sure if these are the same size/thread for the bulkhead mount (and I don't have it in stock to check) we don't sell single nuts/bolts as it would be pretty expensive to buy/box/ship them. But we do sell a thermostat housing fitting kit : 12G103FK but if all you need are nuts, a local hardware store should have them. 

Mini Mania Tech Team

The Classic Mini Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...