Click here for US and INTERNATIONAL SHIPPING ESTIMATES
Package Includes:
- Honda D16 VTEC Engine/Transmission Complete
- MTD Kit
- D Aluminum Radiator Kit (not pictured)
- Poly Engine Mount Kit
- Superbrake Kit
- Swivels Hubs
- Drive Flanges
- D Axle Upgrade
- S Coil-Over Shock Kit
- D16 Chipped ECU
- D Wiring Harness
- Bump Stops
- Shifter
Note: The VTEC engine that comes with this package is a good, used, low-mileage (usually less than 65K miles) engine. The timing belt (if equipped), water pump, plugs and wires, thermostat, transmission seals & bearings are replaced and the engines are freshly painted. Often these engines are "wet run" before delivery.
Why Go VTEC
3 Reasons To Install a VTEC engine Into Your Mini
This question always comes up, “Why would I want to install a Honda VTEC into my Mini?”
The Answers are easy:
1. It’s more powerful than the venerable A-series Classic Mini Engine.2. It’s more reliable than a rebuilt Classic Mini Engine.
3. It’s more efficient than a Classic Engine.
In Short - PERFORMANCE, PERFORMANCE, PERFORMANCE!
Question:
I'm living in FL and the question is an a/c will it be posible in this convention? Fl has the nastiest wether and an a/c is a must
Answer:
Yes, A/C is an option if you have a left-hand drive car.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
I’m quite interested in this kit for my mini (MTD Conversion). Just had a couple of questions: Does the manifold come pre-cut to fit or is that something that I would have to do? Is there any major things that I would need to convert my front end that is not in the kit.
Answer:
I think you will have to cut the manifolds. The kit should be fairly complete, you might check out the 2 links we have on the website showing videos of installs.
Turn around time is currently at 5-6 weeks, could be longer with all of the happenings going on currently.
Turn around time is currently at 5-6 weeks, could be longer with all of the happenings going on currently.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
What is the MTD kit portion of this? Is it the VTEC D SERIES HONDA ENGINE CONVERSION KIT FOR CLASSIC MINI COOPER?
Answer:
"MTD" stands for "MiniTec D-series"
MiniTec are the guys who make these subframes - and this is a package that includes a Honda D-series engine (like a D16Y8 for example) - this kit includes the subframe
MiniTec are the guys who make these subframes - and this is a package that includes a Honda D-series engine (like a D16Y8 for example) - this kit includes the subframe
Mini Mania Tech Team
The Classic Mini Cooper Parts and Accessories Experts
Question:
Does the honda conversion kit come with pedals for automatic swap?
Answer:
It does not include pedals, but take a look at our Pedal Kit that would need to be custom mounted and allow you to run a hydro clutch and brake.
Classic Mini Part Tech.
Classic Mini Part Tech.
Package Includes:
- Honda D16 VTEC Engine/Transmission Complete
- MTD Kit
- D Aluminum Radiator Kit (not pictured)
- Poly Engine Mount Kit
- Superbrake Kit
- Swivels Hubs
- Drive Flanges
- D Axle Upgrade
- S Coil-Over Shock Kit
- D16 Chipped ECU
- D Wiring Harness
- Bump Stops
- Shifter
Note: The VTEC engine that comes with this package is a good, used, low-mileage (usually less than 65K miles) engine. The timing belt (if equipped), water pump, plugs and wires, thermostat, transmission seals & bearings are replaced and the engines are freshly painted. Often these engines are "wet run" before delivery.
Why Go VTEC
3 Reasons To Install a VTEC engine Into Your Mini
This question always comes up, “Why would I want to install a Honda VTEC into my Mini?”
The Answers are easy:
1. It’s more powerful than the venerable A-series Classic Mini Engine.2. It’s more reliable than a rebuilt Classic Mini Engine.
3. It’s more efficient than a Classic Engine.
In Short - PERFORMANCE, PERFORMANCE, PERFORMANCE!
Question:
I'm living in FL and the question is an a/c will it be posible in this convention? Fl has the nastiest wether and an a/c is a must
Answer:
Yes, A/C is an option if you have a left-hand drive car.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
I’m quite interested in this kit for my mini (MTD Conversion). Just had a couple of questions: Does the manifold come pre-cut to fit or is that something that I would have to do? Is there any major things that I would need to convert my front end that is not in the kit.
Answer:
I think you will have to cut the manifolds. The kit should be fairly complete, you might check out the 2 links we have on the website showing videos of installs.
Turn around time is currently at 5-6 weeks, could be longer with all of the happenings going on currently.
Turn around time is currently at 5-6 weeks, could be longer with all of the happenings going on currently.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Question:
What is the MTD kit portion of this? Is it the VTEC D SERIES HONDA ENGINE CONVERSION KIT FOR CLASSIC MINI COOPER?
Answer:
"MTD" stands for "MiniTec D-series"
MiniTec are the guys who make these subframes - and this is a package that includes a Honda D-series engine (like a D16Y8 for example) - this kit includes the subframe
MiniTec are the guys who make these subframes - and this is a package that includes a Honda D-series engine (like a D16Y8 for example) - this kit includes the subframe
Mini Mania Tech Team
The Classic Mini Cooper Parts and Accessories Experts
Question:
Does the honda conversion kit come with pedals for automatic swap?
Answer:
It does not include pedals, but take a look at our Pedal Kit that would need to be custom mounted and allow you to run a hydro clutch and brake.
Classic Mini Part Tech.
Classic Mini Part Tech.
Loading...
Loading...
