MINI Factory OEM replacement Short Bolt for the valve cover. The Valve Cover uses 8 of these bolts along the sides of the valve cover.  Sold each.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

NOTE: The factory valve cover kit does NOT include 'all' of the collar screws (as shown in the photos) - you will need to re-use a few of them or get new ones.

Emblem is not included.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.

Fits:

2002-2006 R50 MINI Cooper and R53 MINI Cooper S Hatchback
2005-2008 R52 Cooper and MINI Cooper S Convertibles.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Mini Cooper factory replacement Valve Cover, see NME7630.

MINI Factory OEM replacement Long Bolt for the valve cover (this bolt has the stud above the head). The Valve Cover uses 4 of these long bolts, 2 each at both ends of the valve cover. Sold each.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.

MINI Factory OEM replacement Valve Cover.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

Includes:

[ ] Oil Filler Cap
[ ] Collar Screws
[ ] Spark Plug Tube Seals
[ ] Crank Case Vent Valve

NOTES:

• The factory valve cover kit does NOT include 'all' of the collar screws (as shown in the photos) - you will need to re-use a few of them or get new ones.
• Valve Cover Gasket is not included but available separately.

Emblem is not included.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.