MINI Factory OEM replacement Valve Cover.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

Includes:

[ ] Oil Filler Cap
[ ] Collar Screws
[ ] Spark Plug Tube Seals
[ ] Crank Case Vent Valve

NOTES:

• The factory valve cover kit does NOT include 'all' of the collar screws (as shown in the photos) - you will need to re-use a few of them or get new ones.
• Valve Cover Gasket is not included but available separately.

Emblem is not included.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.

MINI Factory OEM replacement Long Bolt for the valve cover (this bolt has the stud above the head). The Valve Cover uses 4 of these long bolts, 2 each at both ends of the valve cover. Sold each.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.

MINI Factory OEM replacement Short Bolt for the valve cover. The Valve Cover uses 8 of these bolts along the sides of the valve cover.  Sold each.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

NOTE: The factory valve cover kit does NOT include 'all' of the collar screws (as shown in the photos) - you will need to re-use a few of them or get new ones.

Emblem is not included.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Valve Cover Gasket, see NME7670.

Fits:

2002-2006 R50 MINI Cooper and R53 MINI Cooper S Hatchback
2005-2008 R52 Cooper and MINI Cooper S Convertibles.

Torque settings for valve cover to cylinder head is 12 Nm or 9 ft-lbs.

For the Mini Cooper factory replacement Valve Cover, see NME7630.