× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Free Dashcam - Click Here for More Info!

SAE 75W-80 Motul Motylgear Manual Transmission Fluid Technosynthese® from MOTUL. This fluid is a replacement for BMW LT-2 and LT-3 fluid. API GL-4, GL-5 and MIL-L 2105 D.

Note: Fluids cannot be shipped via air - they can be shipped by ground methods only.

This fluid is appropriate for the following models

5-speed manual (GS5-52 BG manufactured by Getrag):
07/2004-2006 R50 MINI Cooper Hatchback
2005-09/2006 R52 MINI Cooper Convertible

6-speed manual WITHOUT Limited Slip Differential option (GS6-85 BG/DG manufactured by Getrag):
07/2004-2006 R53 Cooper S Hatchback
07/2004-2008 R52 Cooper S Convertible

Appropriate for all mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Performances:

  • Extreme Pressure lubricant for an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time.
  • Stays in 80 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard.
  • Very high lubricating power which decreases friction and wear.
  • 80 viscosity grade at hot temperature reduces gearbox drag and then fuel consumption.
  • Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
  • Less effort required on the gear lever to shift the gears.
  • Suitable for any type of seal and yellow material used in gearboxes design.
  • Anti-corrosion, Anti-foam.

 

PROPERTIES
Viscosity grade SAE J 306 75w-80
Density at 20° C (68° F) ASTM D1298 0.878
Viscosity at 40° C (104° F) ASTM D445 58.8 mm2/s
Viscosity at 100° C (212° F) ASTM D445 10.1 mm2/s
Viscosity Index ASTM D2270 160.0
Pour point ASTM D97 -36.0 °C / -32.0 °F
Flash point ASTM D92 204.0 °C / 399.0 °F

 

 

 

MINI Cooper Manual Transmission Fluid Motul SAE 75W-80 API GL-5

MINI Cooper Manual Transmission Fluid Motul SAE 75W-80 API GL-5

MINI Cooper Manual Transmission Fluid Motul SAE 75W-80 API GL-5
Part No: NMG7323
$17.69
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later
Alternate Products
Mini Cooper Manual Transmission Fluid LT-4 Extended Life 1 Liter
$55.95 Mini Cooper Manual Transmission Fluid LT-4 Extended Life 1 Liter

SAE 75W-80 Motul Motylgear Manual Transmission Fluid Technosynthese® from MOTUL. This fluid is a replacement for BMW LT-2 and LT-3 fluid. API GL-4, GL-5 and MIL-L 2105 D.

Note: Fluids cannot be shipped via air - they can be shipped by ground methods only.

This fluid is appropriate for the following models

5-speed manual (GS5-52 BG manufactured by Getrag):
07/2004-2006 R50 MINI Cooper Hatchback
2005-09/2006 R52 MINI Cooper Convertible

6-speed manual WITHOUT Limited Slip Differential option (GS6-85 BG/DG manufactured by Getrag):
07/2004-2006 R53 Cooper S Hatchback
07/2004-2008 R52 Cooper S Convertible

Appropriate for all mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Performances:

  • Extreme Pressure lubricant for an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time.
  • Stays in 80 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard.
  • Very high lubricating power which decreases friction and wear.
  • 80 viscosity grade at hot temperature reduces gearbox drag and then fuel consumption.
  • Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
  • Less effort required on the gear lever to shift the gears.
  • Suitable for any type of seal and yellow material used in gearboxes design.
  • Anti-corrosion, Anti-foam.

 

PROPERTIES
Viscosity grade SAE J 306 75w-80
Density at 20° C (68° F) ASTM D1298 0.878
Viscosity at 40° C (104° F) ASTM D445 58.8 mm2/s
Viscosity at 100° C (212° F) ASTM D445 10.1 mm2/s
Viscosity Index ASTM D2270 160.0
Pour point ASTM D97 -36.0 °C / -32.0 °F
Flash point ASTM D92 204.0 °C / 399.0 °F

 

 

 

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...