MINI factory replacement OEM Clutch Slave Cylinder for the 1st generation MINI Cooper S models including 2002-2006 R53 Hardtop and 2005-2008 R52 Convertible.
OEM Clutch Slave Cylinder MINI Cooper Cooper S R52 R53 Gen1
OEM Clutch Slave Cylinder MINI Cooper Cooper S R52 R53 Gen1
OEM Clutch Slave Cylinder MINI Cooper Cooper S R52 R53 Gen1
Selected: MINI Cooper Clutch Slave for Cooper S
MINI Factory replacement OEM Clutch Slave Cylinder. The plastic body of this unit makes this slave cylinder rather delicate and can lead to failure when clutch components fail.
Fits the following models:
2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper S Convertibles
For the Clutch Hydraulic Lines, see NMG7625-P.
MINI Factory replacement OEM Clutch Slave Cylinder. The plastic body of this unit makes this slave cylinder rather delicate and can lead to failure when clutch components fail.
Fits the following models:
2002-2006 R53 MINI Cooper S Hatchback
2005-2008 R52 MINI Cooper S Convertibles
For the Clutch Hydraulic Lines, see NMG7625-P.
Question:
I installed a new master cylinder in a 2002 MINI Cooper S, I installed the hard line into the end with the clip. I have a small drip every 5 -10 seconds from the plastic 90 degree bend attachment into the master cylinder after bleeding the system. Is there an o-ring or rubber piece that may have been missing on the plastic end of the hard line?
Answer:
There is no o-ring. The line just has a set of 1 way valves, you can see the line here
https://www.minimania.com/part/NMG7625/Hydraulic-Lines-Clutch-Slave-Line-A---R50-52-53-Cooper--S
https://www.minimania.com/part/NMG7625/Hydraulic-Lines-Clutch-Slave-Line-A---R50-52-53-Cooper--S
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
