Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

The outer A pillar cover is attached with 4 expanding rivets (included) and 4 hidden screws (not included) behind the seal in the door jamb. Windshield installers sometimes miss the hidden screws and break the tabs for the screws during the windshield replacement. Once the screw tabs are broken, only the 4 plactic rivets will hold the cover in place and guess what.... it won't stay very long!

The 'molded piece' can be re-used, but if it is missing, then you need to order one per side.

Select Passenter Side (Right side) cover or underlying molded piece, or Drivers Side (Left Side) cover or molded piece.

Professional installation is recommended - installation instructions are not available.

For A Pillar Covers and Gaskets for 2007+ R56 MINI Cooper and Cooper S Hatchback, 2008+ R55 MINI Cooper and Cooper S CLUBMAN, and 2009+ R57 MINI Cooper and Cooper S Convertibles, see G2NMX7625L.

The Left side 'Molded Piece' that fits under the A-pillar cover between the front windshield and the door glass on the drivers side (on US MINIs). Each available separately.

Order this for the Left Side Molded Piece, drivers side on left had drive cars.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

If your windshield has been replaced, you need these new A pillar covers. From our experience, we found these parts are not re-usable once removed. If you re-use your old ones, there is a very good chance they will depart from your car somewhere down the road when you least expect it...

The 'molded piece' can be re-used, but if it is missing, then you need to order one per side.

For A Pillar Covers and Gaskets for 2007+ R56 MINI Cooper and Cooper S Hatchback, 2008+ R55 MINI Cooper and Cooper S CLUBMAN, and 2009+ R57 MINI Cooper and Cooper S Convertibles, see G2NMX7625L.

The Right side 'Molded Piece' that fits under the A-pillar cover between the front windshield and the door glass on the passenger side (on US MINIs).  Each available separately.

Order this for the Right Side Molded Piece, passenger side on left had drive cars.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

If your windshield has been replaced, you need these new A pillar covers. From our experience, we found these parts are not re-usable once removed. If you re-use your old ones, there is a very good chance they will depart from your car somewhere down the road when you least expect it...

The 'molded piece' can be re-used, but if it is missing, then you need to order one per side.

For A Pillar Covers and Gaskets for 2007+ R56 MINI Cooper and Cooper S Hatchback, 2008+ R55 MINI Cooper and Cooper S CLUBMAN, and 2009+ R57 MINI Cooper and Cooper S Convertibles, see G2NMX7625L.

The left side (driver's side on US models) A-pillar trim is the black plastic trim piece between the front windshield and the driver's side door glass.  (4) A-pillar clips (rivets) are included with the cover .

Fits the following models:

2002-2006 R50 MINI Cooper Non-S Hardtop/Hatchback
2002-2006 R53 MINI Cooper S Hardtop/ Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

If your windshield is replaced, you will need these new A-pillar covers. There are (4 ) hidden screws behind the seal of your MINI's door jam. Windshield installers sometimes miss the hidden screws and break the tabs that are on the A-pillar during the windshield replacement. Once the screw tabs are broken, it won't stay very long and only the 4 plastic rivets (that come with this part) will hold the cover in place!

From our experience,  these parts are not re-usable once removed.  If you re-use your old A-pillar trim, there is a very good chance they will fall from your MINI somewhere on the road when you least expect it...

The 'molded piece' part NMX1113L, can be re-used, but if it is missing, then you need to order one per side.

The Right Side (passenger side on US models) A-pillar trim is the black plastic trim piece between the front windshield and the driver's side door glass.  (4) A-pillar clips are included with the cover  and are also available to purchase separately.    

Order this A-pillar for the Right Side Trim Piece, passenger side on left hand drive cars

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible

When your windshield is replaced, you will need these new A-pillar covers.   There are (4 ) hidden screws behind the seal of your MINI's door jam.  Windshield installers sometimes miss the hidden screws and break the tabs that are on the A-pillar during the windshield replacement.  Once the screw tabs are broken, only the 4 plastic rivets will hold the cover in place and.... it won't stay very long!  

From our experience,  these parts are not re-usable once removed.  If you re-use your old A-pillar trim, there is a very good chance they will fall from your MINI somewhere on the road when you least expect it...

The 'molded piece' can be re-used, but if it is missing, then you need to order one per side.

Replacement CLIP for the A-Pillar, sold in packages of 6 each. If you need to replace just the clips and not the A-Pillar cover, you will need 4 of these clips for each cover (4 per side, 8 total for both covers). These clips are included with the replacement A-Pillar cover.

The 'A' pillar trim is the black plastic trim piece between the front windshield and the door glass.

Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hardtop
2005-2008 R52 MINI Cooper and Cooper S Convertible