We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car: 
BMW Mini Cooper
Select
Genuine K&N Air Filter Cone for HIF6 and HIF44 | Fits Classic Mini and Sprite/Midget

Genuine K&N Air Filter Cone for HIF6 and HIF44 | Fits Classic Mini and Sprite/Midget

Genuine K&N Air Filter Cone for HIF6 and HIF44 | Fits Classic Mini and Sprite/Midget

Genuine K&N Air Filter Cone for HIF6 and HIF44 | Fits Classic Mini and Sprite/Midget

Genuine K&N Air Filter Cone for HIF6 and HIF44 | Fits Classic Mini and Sprite/Midget
This item is currently not available.
Expected back in stock after Mar-30-2021
$99.95
Highly polished chrome cover cone filter.
The cotton gauze filter design from K&N provides positive gain that you would expect. Average filter life is 100,000 miles!
'Conical' 5.875" diameter x 2" high, fits 1.75" SU carb.
K&N developed and manufactures the only air filtration system of its kind: a high flow, washable filter that's proven to be the finest in the world. Professional racers and mechanics worldwide rely on K&N air filters to protect their engines – and so should you.
NOTE: not compatable with the SS53 stub stacks.
 
 
Question:
Hi, I recently installed a new HIF44 + stub stack + K&N filter kit that I purchased 10 years ago. I just finally installed it and got the hood on this past weekend. The K&N filter I have is the 6” X 2 ½” tall assembly. With new engine mounts the outboard part of the filter outer metal cover just rubs on the hood (at certain RPMs), and so I’m looking for a conical one that will work with this carb and stub stack. I’m using this on a 74 Midget. Will part #SD40 work for this application? Thanks,
Answer:
Hi.
Not sure. It's usually the top of the carb dash pot damper cap of the HIF44's that touches the inside of the Spridget bonnets. You could give it a try - you could always return it if it doesn't fit - just be careful not to damage the filter in the testing process and save the original packaging.
-hope this helps

FOLLOW UP QUESTION:  I was able to get myself a low profile dashpot cap from ebay UK (off a Volvo I think) that doesn’t have the top hat.  So that removed that clearance issue…  They are available new from the SU folks in the UK (Burlen I think) if yall are ever interested in stocking them. I’ll get you the model number if you want it.

It looked to me as though the bolt pattern on the conical filter was off center… is this correct?

 

FOLLOW UP ANSWER:  Yes, we offer the low profile dash caps, thanks. Also not that Maniflow offers a steel manifold for this application that is already lower than the Mini type in case you ever what the assembly to have even more clearance: https://www.spridgetmania.com/part/C-AHT669/Steel-Intake-Manifold-Fo-Hif44-175-Inch-Su-Carbs--Sprite--Midget

And yes, this filter is offset. Note that you may need to remove/replace that hex bolt on the back of the filter. It tends to foul the flush fitment of the filter.

- Mini Mania

 
 
Loading...
Loading...
Loading...
Related Technical Articles:
SAVE BIG with our 12% OFF Classic Mini SPRING CLEAN SALE
Created: April 18, 2019
SAVE BIG with our 12% OFF during our Classic Mini SPRING CLEAN SALE April 19th, 2018 - April 30th, 2019 SAVE on air, oil and fuel filters for a LIMITED TIME ONLY
Classic Mini Cooper K&N Air Filters
Created: February 27, 2019
See our complete selection of K&N air filters for your Classic Mini. We have filter for all models of both original SU Carbs as well as all needed for a Weber conversion.
Classic Mini Cooper AIR FILTERS page 19
Created: October 10, 2017
View the selection of Air Filters for your Classic Mini Cooper form the Mini Mania Catalog as a PDF. Find a Part No. in the catalog. Type or copy/paste it into the search box to find it on the website.
Loading...
Loading...
Loading...
Recently Viewed Items