We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car:
Created: December 21, 2015
When you are trying to build a motor to get the ultimate of performance you often optimize the life expectancy of the entire assembly. One such area centers around the rocker assembly. In general the rockers are part of the process that translates the lobe of the rotating camshaft to the vertical deflection needed to open the valves on the cylinder head.
Created: September 30, 2004
A question that has cropped up frequently on the message board lately, and one that I do not ever recall having been set down in print in any magazines, is that of how to decide what the valve clearances should be when changing from the standard rocker gear to higher-lift options. So I thought I wo...
Created: August 28, 2002
Whether you’re building a solid road performer or fire-breathing monster, the main goal is to improve air/fuel flow into the engine. The more you can get in, the more power you can get out. Cheapest chunk of power improvement comes from sorting the asthmatic manifolding and exhaust by applying a stage one kit. Then what?
Created: January 30, 2000
The new generation of short period, high lift cams have been developed to give the best results in large bore engines when used in conjunction with 1.5 ratio, hi-lift rockers. For the small bore range, the stock 1.3 ratio is optimum. In certain instances ratios of 1.7 to 1 are of benefit - but is really only applicable to fully developed race engines.