Pilot Bush, Crank To Gearbox, 948 - Early 1275 Sprite, Midget & Morris Minor

This spigot bushing fits into the end of crankshaft and hold the outer end of the input gear of the transmission. If it often overlooked and thus allows higher loads on the trans than necessary. It is recommended that EVERYTIME the engine is worked on that this simple bush be replaced! This bush has a 5/8" OD and fits all cranks from the 948cc to the early 1275cc type. The later 1275 cranks use a needle bearing with a OD of 3/4", part no. AHU1026.