× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be used for competition. Definately not recommended for using on cars when 1" wider spacered type brake drums are already fitted as it will cause serious overloading of the wheel bearings. Replacement bolts are available as BG4001BOLT.
Austin Mini Wheel Spacer 1.25 With Studs Sold Per Pair

Austin Mini Wheel Spacer 1.25 With Studs Sold Per Pair

Austin Mini Wheel Spacer 1.25 With Studs Sold Per Pair
Part No: BG4001
$64.95
Qty:
Fits the following:
Classic Mini
Sprite & MG Midget
Morris Minor
Alternate Products
3/4 Inch Thick Wheel Spacers & Studs Kit | Mini | Spridget | Morris Minor
$51.95 3/4 Inch Thick Wheel Spacers & Studs Kit | Mini | Spridget | Morris Minor
1 Inch Thick Wheel Spacers & Studs Kit | Mini | Spridget | Morris Minor
$67.95 1 Inch Thick Wheel Spacers & Studs Kit | Mini | Spridget | Morris Minor
Many aftermarket wheels, when combined with wide tires, will require the use of spacers to avoid tire rub. Spacers are sold by the pair and this the widest available at 32mm wide and have studded wheel bolts because of the extra length, must not be used for competition. Definately not recommended for using on cars when 1" wider spacered type brake drums are already fitted as it will cause serious overloading of the wheel bearings. Replacement bolts are available as BG4001BOLT.
Loading...
Loading...
Loading...
Related Technical Articles:
Classic Mini Cooper Tires, Wheel Spacers & Nuts page12
Created: January 10, 2019
Wide selection of 10", 12" & 13" tires are all features on this page. Tires with 145, 165 & 175 section width can be fitted to various models of the Classic Mini Cooper. Wheel Spacers for the Mini are also listed as well as wheel nuts.
Suspension for Sprites & Midgets
Created: January 28, 2011
Front suspension geometry can be altered to improve the cars road holding, further enhancing its cornering ability. Standard settings from the factory are 3/4° of positive camber, approximately 3° of Castor, and 1/8" toe in. Stock Spring rate is 271lbf/in.
Loading...
Loading...
Loading...