Heavy Duty Race Harmonic Damper, Billet Steel, BMC A-Series Engines
Heavy Duty Race Harmonic Damper, Billet Steel, BMC A-Series Engines
Alternate Products
$231.90
Vibration Damper Front Pulley Thin A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor
$83.88
Vibration Damper Front Pulley Thick A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor
Competition damper for hot street or race engines made by BHJ. This is a one piece damper so if used at 6000+ RPM for long periods rebuilding is recommended every two years.
- Fits BMC A-Series 1275cc 4-Cyl.
- Race Prepared with OE-Type Pulley Design
- Integral 3/8" V-Belt Pulley In Stock Location On Inertia Ring
- Internal Balance
- 4.765" O.D.
- 1.775" Overall Length
- 3.3 lbs. Gross Weight
- Billet Steel Construction
- SFI 18.1 Certified
Question:
How does the harmonic balancer come off this car? A standard puller won't work. There is no hole for the shaft of the puller to go through. Instead, there is just a pin that appears to have been pressed in place.
Answer:
Here is what the manual says:
Remove screws (arrows).
Feed out and remove the vibration damper (1).
No mention of any special tools
Remove screws (arrows).
Feed out and remove the vibration damper (1).
No mention of any special tools
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Competition damper for hot street or race engines made by BHJ. This is a one piece damper so if used at 6000+ RPM for long periods rebuilding is recommended every two years.
- Fits BMC A-Series 1275cc 4-Cyl.
- Race Prepared with OE-Type Pulley Design
- Integral 3/8" V-Belt Pulley In Stock Location On Inertia Ring
- Internal Balance
- 4.765" O.D.
- 1.775" Overall Length
- 3.3 lbs. Gross Weight
- Billet Steel Construction
- SFI 18.1 Certified
Question:
How does the harmonic balancer come off this car? A standard puller won't work. There is no hole for the shaft of the puller to go through. Instead, there is just a pin that appears to have been pressed in place.
Answer:
Here is what the manual says:
Remove screws (arrows).
Feed out and remove the vibration damper (1).
No mention of any special tools
Remove screws (arrows).
Feed out and remove the vibration damper (1).
No mention of any special tools
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Recommended items for: COM797
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
