"AAT" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Selected: "AAT" = CUD1017
Select variations below for more info:
"AAT" = CUD1017
$35.98
"AAA" = CUD1000
$35.98
"AAB" = CUD1001
$30.95
"BCA" = CUD1148
$39.95
"AAQ" = CUD1014
$20.95
"AAR" = CUD1015
$20.95
"AAS" = CUD1016
$20.95
"AAV" = CUD1019
$21.95
"ADB" = CUD1027
$20.95
"ABJ" = CUD1032
$6.39
"ABP" = CUD1037
$27.95
"BBZ" = CUD1147
$32.98
"BCE" = CUD1152
$20.95
"BCV" = CUD1167
$24.95
"BCZ" = CUD1171
$7.02
"KN" = CUD1538
$24.95
"BAE" = CUD1104
$7.08
"BAF" = CUD1105
$35.98
"BAG" = CUD1106
$32.98
"BAL" = CUD1110
$47.95
"BAP" = CUD1113
$35.98
"ADZ" = NZX4024
$32.98
"ADE" = NZX4005
$20.95
"ADP" = NMX4014
$32.98
"AAK" = CUD1009
$29.95
"AAC" = CUD1002
$29.95
"AAM" = CUD1011
$20.95
"AAU" = CUD1018
$23.95
"ABY" = CUD1046
$20.95
"ABB" = CUD1025
$27.95
"BBC" = CUD1126
$20.95
" AAL " = 111-AAL
$29.95
"AAG" = CUD1006
$32.98
"AAP" = CUD1013
$20.95
CLOSEOUT! Prices apply to stock on hand only.
"AAT" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAA" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su CarburetorAaa Needle Su Carburetor
Selected: "AAA" = CUD1000
"AAA" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Austin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor NeedleAustin Mini Aab Su Carburetor Needle
Selected: "AAB" = CUD1001
"AAB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BCA" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su CarburetorBca Needle Su Carburetor
Selected: "BCA" = CUD1148
"BCA" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAQ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su CarburetorAaq Needle Su Carburetor
Selected: "AAQ" = CUD1014
"AAQ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAR" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su CarburetorClassic Mini Aar Needle Su Carburetor
Selected: "AAR" = CUD1015
"AAR" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAS" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su CarburetorAas Needle Su Carburetor
Selected: "AAS" = CUD1016
"AAS" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAV" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su CarburetorClassic Mini Aav Needle Su Carburetor
Selected: "AAV" = CUD1019
"AAV" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ADB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Adb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su CarburetorAdb Needle Su Carburetor
Selected: "ADB" = CUD1027
"ADB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ABJ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Abj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su CarburetorAbj Needle Su Carburetor
Selected: "ABJ" = CUD1032
"ABJ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ABP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su CarburetorClassic Mini Abp Needle Su Carburetor
Selected: "ABP" = CUD1037
"ABP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BBZ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su CarburetorBbz Needle Su Carburetor
Selected: "BBZ" = CUD1147
"BBZ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BCE" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su CarburetorBce Needle Su Carburetor
Selected: "BCE" = CUD1152
"BCE" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BCV" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su CarburetorBcv Needle Su Carburetor
Selected: "BCV" = CUD1167
"BCV" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Question:
I have a supercharged 1380 motor with an su carb,
Have tried bcv needle and bdk needle, car is on a dyno and we haven’t been able to get a good a/f ratio over 4K. And these two needles are very lean from start-up till 4K, what is your recommendation?
Answer:
We list a few that are close to the BCV, but we do have 2 that are richer, BCA is the next one down and the BCG is very rich . We would have to special order both so apx. 2 + weeks to get.
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
"BCZ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su CarburetorBcz Needle Su Carburetor
Selected: "BCZ" = CUD1171
"BCZ" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"KN" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Kn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su CarburetorKn Needle Su Carburetor
Selected: "KN" = CUD1538
"KN" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BAE" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su CarburetorBae Needle Su Carburetor
Selected: "BAE" = CUD1104
"BAE" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BAF" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Baf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su CarburetorBaf Needle Su Carburetor
Selected: "BAF" = CUD1105
"BAF" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BAG" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su CarburetorBag Needle Su Carburetor
Selected: "BAG" = CUD1106
"BAG" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BAL" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Bal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su CarburetorBal Needle Su Carburetor
Selected: "BAL" = CUD1110
"BAL" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BAP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Austin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor NeedleAustin Mini Bap Su Carburetor Needle
Selected: "BAP" = CUD1113
"BAP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ADZ" Needle
"ADE" Needle
Classic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade NeedleClassic Mini Ade Needle
Selected: "ADE" = NZX4005
"ADE" Needle
"ADP" 998 STD Mixture SU Needle
"AAK" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su CarburetorAak Needle Su Carburetor
Selected: "AAK" = CUD1009
"AAK" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAC" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su CarburetorClassic Mini Aac Needle Su Carburetor
Selected: "AAC" = CUD1002
CLOSEOUT! Prices apply to stock on hand only.
"AAC" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAM" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su CarburetorAam Needle Su Carburetor
Selected: "AAM" = CUD1011
"AAM" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAU" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su CarburetorClassic Mini Aau Needle Su Carburetor
Selected: "AAU" = CUD1018
"AAU" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ABY" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Aby Needle Su CarburetorAby Needle Su CarburetorAby Needle Su CarburetorAby Needle Su CarburetorAby Needle Su CarburetorAby Needle Su Carburetor
Selected: "ABY" = CUD1046
"ABY" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"ABB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Classic Mini Abb Needle Su CarburetorClassic Mini Abb Needle Su CarburetorClassic Mini Abb Needle Su CarburetorClassic Mini Abb Needle Su CarburetorClassic Mini Abb Needle Su Carburetor
Selected: "ABB" = CUD1025
"ABB" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"BBC" Needle Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs.
Selected: "BBC" = CUD1126
"BBC" Needle Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs.
"AAL" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Selected: " AAL " = 111-AAL
"AAL" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAG" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Selected: "AAG" = CUD1006
"AAG" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Selected: "AAP" = CUD1013
"AAP" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
"AAT" Needle
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Created: May 21, 2005
Here are a selection of needles codes and the vehicle specs that they were used in...
Created: September 08, 2000
Being an oft-voiced question on the message board, I thought I'd share it with you. Since there is already a very good source of starting points/applications for fixed needle carbs, this is for those floundering about in the wilderness that is the biased (swinging) needle example of the breed.
- Home
- Related Websites
- Products
- Articles & Help
- Social
- Visit us on:
-
Mini Mania
870 Gold Flat Rd.
Nevada City, CA 95959 USAPhone: 530.470.8300
Fax: 530.470.8388
Your Login Failed.
Your E-Mail and/or password are incorrect. Please try again.
Passwords are case-sentive.
If you continue to have problems click on the Help Icon for additional options.
Login with your E-Mail Address. If you would like your login information reset, click on the button below to request your login information to be resent.