Alternate Products
$84.95
Classic Austin Mini Thrust Washer For 1275 Primary Gear .117
$83.95
Classic Austin Mini Thrust Washer For 1275 Primary Gear .120
Standard gap size should be between 3-6 thou. See DAM6486, DAM6487, DAM6488, DAM6490, DAM6492 for alternatives. This type is for the 1275cc crankshaft only which has a raised step for the primary gear to sit on. Race applications can be increased plus 3 thou. Thrust washer 0.120-122”(3.04-3.09mm). The measurement is taken as plus or minus one to the size hence the two thousands tolerance on each part number.
Standard gap size should be between 3-6 thou. See DAM6486, DAM6487, DAM6488, DAM6490, DAM6492 for alternatives. This type is for the 1275cc crankshaft only which has a raised step for the primary gear to sit on. Race applications can be increased plus 3 thou. Thrust washer 0.120-122”(3.04-3.09mm). The measurement is taken as plus or minus one to the size hence the two thousands tolerance on each part number.
Also Purchased with: DAM6489
-
GSJ166-MS -
13H9513
-
22A1155
-
22A319
-
22G109
-
88G549GENUINE
-
AAU1365
-
ADU7619
-
AHU1048-MS
-
AHU1707
Loading...
Loading...
