× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper S John Cooper Works and GP models.

Fits the following models:

2011-2013 R56 JCW MINI Cooper S Hardtop
2013 R56  GP Hardtop

According to K&N Filters, this product is street legal in all US States (including California) for the following models:

2011-2012 R56 JCW Mini Hardtop
2011 R55 JCW Mini Clubman 

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2025TS air intake comes with a black rubber topped K&N high-flow air filter and a rectangular heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches.

Features:

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
  • Street legal in most states (some not street legal in CA)
Gains of 6.03hp @ 5602 rpm and 4.64lb-ft @ 455 rpm.  (Horsepower gains based on specific or similar vehicle dynamometer test. Results will vary.)


 

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

K&N Typhoon Intake Gen2 Mini Cooper S  R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S  R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S  R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S R56 JCW & GP 2011-2013

K&N Typhoon Intake Gen2 Mini Cooper S  R56 JCW & GP 2011-2013
Selected: Cooper S R56 JCW & GP 2011-2013
Part No: G2NME2019
$419.99
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)

K&N Typhoon™ Intake System for your MINI!  Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit the MINI Cooper S models with the N18 engine.

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following Cooper S models with the N18 engine:

2011-2013 R56 MINI Cooper S Hatchback
2011-2014 R55 MINI Cooper S Clubman

US Models only, not compatible with non-US Euro models.

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon™ air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. This Typhoon™ kit comes with a black rubber topped K&N high-flow air filter and a rectangular heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized tapered cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

Dyno tests showed 8.51 hp gains!

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty

Manufacturer's Warranty applies.

According to K&N Filters, this product is street legal in all US States (including California) for the following models:

2011-2012 R56 MINI Cooper S Hardtop 
2011-2012 R55 MINI Cooper S Clubman 
2011-2012 R60 MINI Cooper S Countryman

CARB EO number: D-269-53. This kit is NOT CARB approved for 2013-2016 models.

 

See K&N Typhoon Installation Instructions here.

 

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

For the R56 Cooper K&N Intake, see G2NME2018 or G2NME2016.

 

K&N Typhoon™ Intake System for your MINI! Street legal in all US States for 2007-2010 Cooper S models. CARB EO number: D-269-38.

Fits the following models with the N14 engine:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

NOTES:

  • US Models only, not compatible with non-US Euro models
  • Not compatible with JCW models with the N14 engine

Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit the new R56 MINI Cooper S Hatchback.

This Short Ram (SR) Typhoon intake is designed to dramatically reduce intake restriction allowing more air flow to your engine. More air means more usable power and acceleration throughout the engine's RPM range. Dyno tests showed 11.17 hp gains!

[ ] Designed for increased performance utilizing finest quality components.
[ ] Guaranteed to provide more horsepower and increased acceleration.
[ ] Includes K&N High-Flow Wahable / Reusable Air Filter.
[ ] Easy to Install.
[ ] Million Mile Warranty.

Manufacturer's Warranty applies.

Street legal in all US States for 2007-2010 Cooper S models.  CARB EO number: D-269-38.

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

For the R56 Cooper K&N Intake, see G2NME2018 or G2NME2016.

See installation instructions.

The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper S John Cooper Works and GP models.

Fits the following models:

2011-2013 R56 JCW MINI Cooper S Hardtop
2013 R56  GP Hardtop

According to K&N Filters, this product is street legal in all US States (including California) for the following models:

2011-2012 R56 JCW Mini Hardtop
2011 R55 JCW Mini Clubman 

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2025TS air intake comes with a black rubber topped K&N high-flow air filter and a rectangular heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches.

Features:

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
  • Street legal in most states (some not street legal in CA)
Gains of 6.03hp @ 5602 rpm and 4.64lb-ft @ 455 rpm.  (Horsepower gains based on specific or similar vehicle dynamometer test. Results will vary.)


 

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

Loading...
Loading...
Loading...
Related Technical Articles:
Find MINI Performance Air Intakes & Air Filters | Gen1 Gen2 Gen3
Created: January 09, 2020
Find and shop for MINI Cooper Performance Air Intakes and Air Filters | K&N Air Intakes and Filters, NM Engineering Air Intakes and Air Filters, AFE Cold Air Intakes, and more.
MINI Performance Air Intakes and Air Filters | Gen2 R55-R61
Created: January 09, 2020
Find and shop for MINI Cooper Performance Air Intakes, Air Filters, and kits | Gen2 R55, R56, R57, R58, R59, R60, R61 | K&N Air Intakes and Filters, NM Engineering Air Intakes, and more.
 Intake Kits & Parts for R55-R61 MINI Cooper and Cooper S
Created: September 05, 2017
The Cold Air Intake upgrade is one of the most common and simplest performance upgrades you can do to your Mini Cooper and Cooper S. Whether it is a simple filter replacement or a complete Intake Kit, these products are 'bolt-on' solutions with no permanent modifications to the...
Find the best Intake Upgrade for your MINI Cooper
Created: April 08, 2016
Mini Cooper Intake Upgrades are designed to improve the flow of air into the engine by replacing the restrictive stock airbox and filter. Gains are typically felt in the mid-to-upper RPM with typical horsepower gains of 4 to 6 HP.
All About K&N Cold Intakes for MINI Coopers
Created: February 26, 2016
Cold Air Intake upgrade is one of the simplest performance upgrades you can do to your Mini Cooper and Cooper S. Whether it is a simple filter replacement or a complete Intake Kit, these products are 'bolt-on' solutions with no permanent modifications to the Mini and completely reversible to stock
MINI Cooper Engine Comparison N14 vs N18
Created: March 05, 2015
The Mini Cooper engine comparison allows for a better understanding of the N14 and N18 engines from BMW
Loading...
Loading...
Loading...