× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
NM Engineering’s Premium SPEC-B FRONT Adjustable Sway Bar End Links or Drop Links for LOWERED MINIS with Coilover Suspension. They provide three benefits:

* Direct transmission of suspension movements to the sway bar
* On lowered vehicles, allows repositioning of sway bar to neutral position
* Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars

Fits all current new MINI models including:
2002-2006 R50 MINI Cooper and Cooper S Hatchbacks
2005-2008 R52 MINI Cooper and Cooper S Convertibles
2007-2011 R56 MINI Cooper and Cooper S Hatchback
2008-2011 R55 MINI Cooper and Cooper S CLUBMANs
2009-2011 R57 MINI Cooper and Cooper S Convertibles

Stock Drop Links are 11.75" in length. These links are adjustable from about 10.5" up to 11.75".

Everything starts with the material – after all, it is the foundation of the part. NM Engineering did not skimp here as these links are precision CNC machined from 7075-T6 aluminum here in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear to other elements such as brake lines and brake pad sensor wires.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear of the brake lines and brake pad sensor wires. To give you an idea how thin the link is, the centers of the NM links are thinner than a standard AA battery.

NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allow an additional ¼" of adjustment compared to others being sold in the market.

The length of the links are 3" shorter than the OE link (with ample of adjustment) and is a match for most performance lowering springs out there. This is also 'the' solution for enthusiasts out there with coil-over suspension that lower the ride height more than 1.5". Be wary of adjustable links that are the same length as the OE units as they will not have sufficient adjustment to position the sway bar sit in a neutral position, relative to the swing arm.

By the way, a quick note on the materials we use…whether it is 6061-T6 or 7075-T6, all grade materials we purchase are certified. We will NEVER buy uncertified scrap or overrun materials from metal/alloy vendors. Re-use the Stock Nuts with these Drop Links.

Material Strength Data:

6061-T6: Tensile 45 ksi, Yield 40 ksi
7075-T6: Tensile 83 ksi, Yield 73 ksi
4130 Chromoly: Tensile 80 ksi, Yield 56 ksi

NM Engineering’s Front Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must especially on lowered vehicles or cars equipped with aftermarket sway bars.

For the Rear Adjustable Drop Links, see G2NMS21012.

Mini Cooper End Link Drop Link Front Adjustable Nm For Coilovers

Mini Cooper End Link Drop Link Front Adjustable Nm For Coilovers

Mini Cooper End Link Drop Link Front Adjustable Nm For Coilovers

Mini Cooper End Link Drop Link Front Adjustable Nm For Coilovers

Mini Cooper End Link Drop Link Front Adjustable Nm For Coilovers
Selected: Front pair for Coilovers
Part No: G2NMS2110
$351.95
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later
NM Engineering’s Premium FRONT Adjustable Sway Bar End Links or Drop Links provides three benefits:

* Direct transmission of suspension movements to the sway bar
* Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars

Fits the following models:
2002-2006 R50 MINI Cooper and Cooper S Hatchbacks
2005-2008 R52 MINI Cooper and Cooper S Convertibles
2007-2013 R56 MINI Cooper and Cooper S Hardtop
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible 

Stock Drop Links are 11.75" in length. These links are adjustable from about 11.75" up to 13.0".

Everything starts with the material – after all, it is the foundation of the part. NM Engineering did not skimp here as these links are precision CNC machined from 7075-T6 aluminum here in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear to other elements such as brake lines and brake pad sensor wires.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear of the brake lines and brake pad sensor wires. To give you an idea how thin the link is, the centers of the NM links are thinner than a standard AA battery.

NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allow an additional ¼" of adjustment compared to others being sold in the market.

The length of the links are similar to the OE link (with ample of adjustment).

By the way, a quick note on the materials we use…whether it is 6061-T6 or 7075-T6, all grade materials we purchase are certified. We will NEVER buy uncertified scrap or overrun materials from metal/alloy vendors. Re-use the Stock Nuts with these Drop Links.

Material Strength Data:

6061-T6: Tensile 45 ksi, Yield 40 ksi
7075-T6: Tensile 83 ksi, Yield 73 ksi
4130 Chromoly: Tensile 80 ksi, Yield 56 ksi

NM Engineering’s Front Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must especially on lowered vehicles or cars equipped with aftermarket sway bars.

For the Rear Adjustable Drop Links, see G2NMS21012.



Click Here for Installation Instructions





Premium Adjustable REAR Sway Bar End Links or Drop Links.  These units are 1" shorter than stock designed specifically for lowered Minis.

provides three benefits:

* Direct transmission of suspension movements to the sway bar
* On lowered vehicles, allows repositioning of sway bar to neutral position
* Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars

Everything starts with the material – after all, it is the foundation of the part. NM did not skimp here as these links are precision CNC machined from 7075-T6 aluminum here in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6.

Another benefit afforded by 7075-T6 is it allowed NM to machine or turn-down the centers of the links to save weight and stay clear of the brake lines and brake pad sensor wires. To give you an idea how thin the link is, the centers of the NM links are thinner than a standard AA battery.

NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allow an additional ¼" of adjustment compared to others being sold in the market.

The length of the links are 25mm shorter than the OE link (with ample of adjustment) and is a match for most performance lowering springs out there. This is also 'the' solution for enthusiasts out there with coil-over suspension that lower the ride height more than 1.5". Be wary of adjustable links that are the same length as the OE units as they will not have sufficient adjustment to position the sway bar sit in a neutral position, relative to the swing arm.

By the way, a quick note on the materials we use…whether it is 6061-T6 or 7075-T6, all grade materials we purchase are certified. We will NEVER buy uncertified scrap or overrun materials from metal/alloy vendors. Re-use the Stock Nuts with these Drop Links.

Material Strength Data:

6061-T6: Tensile 45 ksi, Yield 40 ksi
7075-T6: Tensile 83 ksi, Yield 73 ksi
4130 Chromoly: Tensile 80 ksi, Yield 56 ksi

NM’s Rear Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must especially on lowered vehicles or cars equipped with aftermarket sway bars.

Fits all current new MINI models including:
2002-2006 R50 MINI Cooper and Cooper S Hatchbacks
2005-2008 R52 MINI Cooper and Cooper S Convertibles
2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2013 R55 MINI Cooper and Cooper S CLUBMANs
2009-2013 R57 MINI Cooper and Cooper S Convertibles
2012+ R58 MINI Cooper S COUPE
2012+ R59 MINI Cooper S Roadster

NOTE: We've had reports these drop links are NOT compatible with Alta's rear sway bar. Their bar is larger than stock dimensions, causing a conflict with the hub area.

For the Front Adjustable Drop Links, see G2NMS21012.

NM Engineering’s Premium SPEC-B FRONT Adjustable Sway Bar End Links or Drop Links for LOWERED MINIS with Coilover Suspension. They provide three benefits:

* Direct transmission of suspension movements to the sway bar
* On lowered vehicles, allows repositioning of sway bar to neutral position
* Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars

Fits all current new MINI models including:
2002-2006 R50 MINI Cooper and Cooper S Hatchbacks
2005-2008 R52 MINI Cooper and Cooper S Convertibles
2007-2011 R56 MINI Cooper and Cooper S Hatchback
2008-2011 R55 MINI Cooper and Cooper S CLUBMANs
2009-2011 R57 MINI Cooper and Cooper S Convertibles

Stock Drop Links are 11.75" in length. These links are adjustable from about 10.5" up to 11.75".

Everything starts with the material – after all, it is the foundation of the part. NM Engineering did not skimp here as these links are precision CNC machined from 7075-T6 aluminum here in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear to other elements such as brake lines and brake pad sensor wires.

Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear of the brake lines and brake pad sensor wires. To give you an idea how thin the link is, the centers of the NM links are thinner than a standard AA battery.

NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allow an additional ¼" of adjustment compared to others being sold in the market.

The length of the links are 3" shorter than the OE link (with ample of adjustment) and is a match for most performance lowering springs out there. This is also 'the' solution for enthusiasts out there with coil-over suspension that lower the ride height more than 1.5". Be wary of adjustable links that are the same length as the OE units as they will not have sufficient adjustment to position the sway bar sit in a neutral position, relative to the swing arm.

By the way, a quick note on the materials we use…whether it is 6061-T6 or 7075-T6, all grade materials we purchase are certified. We will NEVER buy uncertified scrap or overrun materials from metal/alloy vendors. Re-use the Stock Nuts with these Drop Links.

Material Strength Data:

6061-T6: Tensile 45 ksi, Yield 40 ksi
7075-T6: Tensile 83 ksi, Yield 73 ksi
4130 Chromoly: Tensile 80 ksi, Yield 56 ksi

NM Engineering’s Front Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must especially on lowered vehicles or cars equipped with aftermarket sway bars.

For the Rear Adjustable Drop Links, see G2NMS21012.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Created: April 24, 2015
NM Engineering improves your motoring experience without changing the essence of what makes MINI a MINI.
NM MINI Tuning Products
Created: December 12, 2013
NM Engineering NM MINI Tuning products help improve your motoring experience while keeping the essence of what makes a MINI a MINI.
MINI Cooper Adjustable Rear Drop Links Installation
Created: February 22, 2013
MINI Cooper Adjustable Rear drop link Installation is made quick and easy with these great instructions from NM Engineering
MINI Cooper Adjustable Front Drop Links Installation
Created: February 22, 2013
NM Engineering’s Premium FRONT Adjustable Sway Bar End Links or Drop Links provides these benefits: * Direct transmission of suspension movements to the sway bar * Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars