These Magna Guard magnetic bonnet/hood stripes are high-quality removable stripes ideal for the second-generation ("Gen2") BMW MINI Cooper and Cooper S models. Now you can change the personality of your MINI to suit your mood! Stripes are 4.0" wide. Actual gloss level(s) may differ from shown. Available in Satin White and Satin Checkered pattern. Instructions included. Sold per pair.

Fits the following models:

• 2007-2013 R56 MINI Cooper and Cooper S Hatchback
• 2008-2014 R55 Cooper and Cooper S Clubman
• 2009-2015 R57 Cooper and Cooper S Convertibles

Combine with "John Cooper Signature" (NMX4061, sold separately) for one cool look!

Following two years of extreme weather testing and constant badgering by MINI owners, these unique Magna Guard magnetic hood stripes are finally available!

Constructed of 0.030" magnetic vinyl, they are available in white or checkered flag graphics. Tested at over 120 miles per hour, they are precut for the BMW MINI Cooper & Cooper S.

PS: These magnetic bonnet stripes can be easily shortened with scissors to fit Classic Minis as well! Stripes may be removed, swapped, waxed etc. at the owner's discretion.

As with any product used on the finish of your car, take extra care that the bonnet is very clean and free from dust and dirt before application. Remove if the car gets wet for drying - reinstall when everything is dry and clean.

For those with concerns about the stripes affecting the finish, here are some comments from customers:

• "LOVE my magnetic stripes. NO problem with them flying off or scratching the paint. I ONLY put them on after I've cleaned up the MINI... and enjoy them a few days and take them off when I'm not in the mood."
• "I clean both the paint and the magnetic side of the badge very carefully with detailing spray and a microfiber. I also store the magnets very carefully to avoid extra dirt or scratches on the magnetic surface (the side that touches the paint). I've never seen any scratches/dullness."
• "I had magnetic stone guards on there before i put on the aero kit, and I've had badges on either side of the license plate on the boot, AND on the 1/4 panel, no issues. Keep the car clean, wash under them and the magnet itself, no worries..."

These Magna Guard SATIN CHECKERED magnetic bonnet/hood stripes are high-quality removable stripes ideal for selected second-generation ("Gen2") BMW MINI Cooper and Cooper S models. Now you can change the personality of your MINI to suit your mood! Stripes are 34-7/8" long, 4.0" wide. Actual gloss level(s) may differ from shown. Sold per pair.

Fits the following models:

• 2007-2013 R56 MINI Cooper and Cooper S Hatchback
• 2008-2014 R55 Cooper and Cooper S Clubman
• 2009-2015 R57 Cooper and Cooper S Convertible

Combine with "John Cooper Signature" (NMX4061, sold separately) for one cool look!

For Satin White version, see G2NMX4076.

Following two years of extreme weather testing and constant badgering by MINI owners, these unique Magna Guard magnetic hood stripes are finally available!

Constructed of 0.030" magnetic vinyl, they are available in white or checkered flag graphics. Tested at over 120 miles per hour, they are precut for the BMW MINI Cooper & S.

PS: These magnetic bonnet stripes can be easily shortened with scissors to fit Classic Minis as well! Stripes may be removed, swapped, waxed etc. at the owner's discretion.

As with any product used on the finish of your car, take extra care that the bonnet is very clean and free from dust and dirt before application. Remove if the car gets wet for drying - reinstall when everything is dry and clean.

For those with concerns about the stripes affecting the finish, here are some comments from customers:

• "LOVE my magnetic stripes. NO problem with them flying off or scratching the paint. I ONLY put them on after I've cleaned up the MINI... and enjoy them a few days and take them off when I'm not in the mood."
• "I clean both the paint and the magnetic side of the badge very carefully with detailing spray and a microfiber. I also store the magnets very carefully to avoid extra dirt or scratches on the magnetic surface (the side that touches the paint). I've never seen any scratches/dullness."
• "I had magnetic stone guards on there before i put on the aero kit, and I've had badges on either side of the license plate on the boot, AND on the 1/4 panel, no issues. Keep the car clean, wash under them and the magnet itself, no worries..."

These Magna Guard SATIN WHITE magnetic bonnet/hood stripes are high-quality removable stripes ideal for selected second-generation ("Gen2") BMW MINI Cooper and Cooper S models. Now you can change the personality of your MINI to suit your mood! Stripes are 34-7/8" long, 4.0" wide. Actual gloss level(s) may differ from shown. Sold per pair.

Fits the following models:

• 2007-2013 R56 MINI Cooper and Cooper S Hatchback
• 2008-2014 R55 Cooper and Cooper S Clubman
• 2009-2015 R57 Cooper and Cooper S Convertible

Combine with "John Cooper Signature" (NMX4061, sold separately) for one cool look!

For Satin Checkered version, see G2NMX4077.

Following two years of extreme weather testing and constant badgering by MINI owners, these unique Magna Guard magnetic hood stripes are finally available!

Constructed of 0.030" magnetic vinyl, they are available in white or checkered flag graphics. Tested at over 120 miles per hour, they are precut for the BMW MINI Cooper & S.

PS: These magnetic bonnet stripes can be easily shortened with scissors to fit Classic Minis as well! Stripes may be removed, swapped, waxed etc. at the owner's discretion.

As with any product used on the finish of your car, take extra care that the bonnet is very clean and free from dust and dirt before application. Remove if the car gets wet for drying - reinstall when everything is dry and clean.

For those with concerns about the stripes affecting the finish, here are some comments from customers:

• "LOVE my magnetic stripes. NO problem with them flying off or scratching the paint. I ONLY put them on after I've cleaned up the MINI... and enjoy them a few days and take them off when I'm not in the mood."
• "I clean both the paint and the magnetic side of the badge very carefully with detailing spray and a microfiber. I also store the magnets very carefully to avoid extra dirt or scratches on the magnetic surface (the side that touches the paint). I've never seen any scratches/dullness."
• "I had magnetic stone guards on there before i put on the aero kit, and I've had badges on either side of the license plate on the boot, AND on the 1/4 panel, no issues. Keep the car clean, wash under them and the magnet itself, no worries..."

Fits:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 Cooper and Cooper S Clubman
2009-2015 R57 Cooper and Cooper S Convertibles

For the White Stripes, see G2NMX4074.

SIZE:

Stripes are angled to fit your Mini.  The Full length is 34 and 7/8 inches. Width is 4 inches.

 Constructed of 0.030" magnetic vinyl, they are available in white or checkered flag graphics. Tested at over 120 miles per hour, they are precut for the BMW Mini Cooper & S.

INSTALLATION

These magnetic bonnet stripes can be easily shortened with scissors to fit Classic Minis as well. Stripes may be removed, swapped, waxed etc. at the owner's discretion.

As with any product used on the finish of your car, take extra care that the bonnet is very clean and free from dust and dirt before application. Remove if the car gets wet for drying - reinstall when everything is dry and clean.

Combine with "John Cooper Signature" (sold separately as part number NMX4061) for one cool look.

Instructions included.

For those with concerns about the stripes affecting the finish, here are some comments from customers: "LOVE my magnetic stripes. NO problem with them flying off or scratching the paint. I ONLY put them on after I've cleaned up the mini... and enjoy them a few days and take them off when I'm not in the mood."

and

"I clean both the paint and the magnetic side of the badge very carefully with detailing spray and a microfiber. I also store the magnets very carefully to avoid extra dirt or scratches on the magnetic surface (the side that touches the paint). I've never seen any scratches/dullness."

and

"i had magnetic stone guards on there before i put on the aero kit, and I've had badges on either side of the license plate on the boot, AND on the 1/4 panel, no issues. Keep the car clean, wash under them and the magnet itself, no worries..."

Fits:

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 Cooper and Cooper S Clubman
2009-2015 R57 Cooper and Cooper S Convertibles

For the Checkered Stripes, see G2NMX4075.

Following two years of extreme weather testing and constant badgering by Mini owners, these unique Magna Guard magnetic hood stripes are finally available.

Constructed of 0.030" magnetic vinyl, they are available in white or checkered flag graphics. Tested at over 120 miles per hour, they are precut for the BMW Mini Cooper & S.

These magnetic bonnet stripes can be easily shortened with scissors to fit Classic Minis as well. Stripes may be removed, swapped, waxed etc. at the owner's discretion.

As with any product used on the finish of your car, take extra care that the bonnet is very clean and free from dust and dirt before application. Remove if the car gets wet for drying - reinstall when everything is dry and clean.

Combine with "John Cooper Signature" (sold separately as part number NMX4061) for one cool look.

Instructions included.

For those with concerns about the stripes affecting the finish, here are some comments from customers: "LOVE my magnetic stripes. NO problem with them flying off or scratching the paint. I ONLY put them on after I've cleaned up the mini... and enjoy them a few days and take them off when I'm not in the mood."

and

"I clean both the paint and the magnetic side of the badge very carefully with detailing spray and a microfiber. I also store the magnets very carefully to avoid extra dirt or scratches on the magnetic surface (the side that touches the paint). I've never seen any scratches/dullness."

and

"i had magnetic stone guards on there before i put on the aero kit, and I've had badges on either side of the license plate on the boot, AND on the 1/4 panel, no issues. Keep the car clean, wash under them and the magnet itself, no worries..."