NM Engineering introduces the intake system for the new 2014+ F56 MINI Coopers. It is a completely bolt-on 'Open-Air-Box' system which gives you the most abundance and unrestricted 360° of air source compared to OEM's sealed air box. A simple 1/2 hour install will get you quicker throttle response, increased power, and more pronounced engine and turbo tunes!

Available with inlet tubes in Blue, Black, or Red.

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

For the 2020+ Gen3 models with the updated late model MAF sensor, see MINI Cooper Cold Air Intake NM Gen3 from 2020+.

NOT compatible with the new 300 hp JCW models.

Yes, this product fits both the B48 2.0L engine in the Cooper S as well as the B38 1.5L engine in the Cooper (non-S).

The NM Intake Kit features:

• One piece mandrel bent aluminum tubing
• OEM triangulate mounting locations
• OEM style billet conical mounting posts
• Wall shield between filter and hot radiator reservoir
• Billet Mass Air Flow (MAF) Sensor fitting
• Durable powder coated finish
• Washable filter element

NOTES:

US Models

• Early Sensor 2014 - 2019
• Late Sensor 2020 - up

NON-US Models

• Early Sensor 2014-2017
• Late Sensor (LCI) 2018 - up

See Hi Flow Intake Installation Instructions here.

NOTE:  Please confirm the sensor type before purchasing. If you have any questions, Email us  picture of your Mass Air Flow Sensor (MAF) to [email protected]. The sensors were updated with the 2020 and newer Lci updated US models.

See this video sound clip:

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

See other Gen3 Intake Upgrade options:

• K&N Typhoon Intake
• Dinan Intake
• NM Engineering Intake
• Cravenspeed Intake

Replacement BLUE Filter for the NM Engineering intake system for the new 2014+ F-Series MINI Coopers. This is the Filter only and does NOT include the intake.

Fits the NM Engineering  Hi-Flo Air Intake on the following models:

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible
2016-2021 F54 MINI Cooper and Cooper S Clubman
2017-2021 F60 MINI Cooper and Cooper S Countryman

Replacement RED Filter for the NM Engineering intake system for the new 2014+ F-Series MINI Coopers. This is the Filter only and does NOT include the intake.

Fits the NM Engineering Hi-Flo Air Intake on the following models:

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible
2016-2021 F54 MINI Cooper and Cooper S Clubman
2017-2021 F60 MINI Cooper and Cooper S Countryman

NM Engineering introduces the intake system for the new 2014+ F56 MINI Coopers. It is a completely bolt-on 'Open-Air-Box' system which gives you the most abundance and unrestricted 360° of air source compared to OEM's sealed air box. A simple 1/2 hour install will get you quicker throttle response, increased power, and more pronounced engine and turbo tunes!

This kit includes Intake Tube in BLACK

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

NOT compatible with the new 300 hp JCW models.

For the 2020+ Gen3 models with the updated late model MAF sensor, see MINI Cooper Cold Air Intake NM Gen3 from 2020+.

Yes, this product fits both the B48 2.0L engine in the Cooper S as well as the B38 1.5L engine in the Cooper (non-S).

The NM Intake Kit features:

• One piece mandrel bent aluminum tubing
• OEM triangulate mounting locations
• OEM style billet conical mounting posts
• Wall shield between filter and hot radiator reservoir
• Billet Mass Air Flow (MAF) Sensor fitting
• Durable powder coated finish
• Washable filter element

NOTES:

US Models

• Early Sensor 2014 - 2019
• Late Sensor 2020 - up

NON-US Models

• Early Sensor 2014-2017
  Late Sensor (LCI) 2018 - up

See Hi Flow Intake Installation Instructions here.

NOTE:  Please confirm the sensor type before purchasing. If you have any questions, Email us  picture of your Mass Air Flow Sensor (MAF) to [email protected]. The sensors were updated with the 2020 and newer Lci US models.

See this video sound clip:

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

See other Gen3 Intake Upgrade options:

• K&N Typhoon Intake
• Dinan Intake
• NM Engineering Intake
• Cravenspeed Intake

NM Engineering introduces the intake system for the new 2014+ F56 MINI Coopers. It is a completely bolt-on 'Open-Air-Box' system which gives you the most abundance and unrestricted 360° of air source compared to OEM's sealed air box. A simple 1/2 hour install will get you quicker throttle response, increased power, and more pronounced engine and turbo tunes!

This kit includes Intake Tube in BLUE

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

NOT compatible with the new 300 hp JCW models.

For the 2020+ Gen3 models with the updated late model MAF sensor, see MINI Cooper Cold Air Intake NM Gen3 from 2020+.

Yes, this product fits both the B48 2.0L engine in the Cooper S as well as the B38 1.5L engine in the Cooper (non-S).

The NM Intake Kit features:

• One piece mandrel bent aluminum tubing
• OEM triangulate mounting locations
• OEM style billet conical mounting posts
• Wall shield between filter and hot radiator reservoir
• Billet Mass Air Flow (MAF) Sensor fitting
• Durable powder coated finish
• Washable filter element

NOTES:

US Models

• Early Sensor 2014 - 2019
• Late Sensor 2020 - up

NON-US Models

• Early Sensor 2014-2017
  Late Sensor (LCI) 2018 - up

See Hi Flow Intake Installation Instructions here.

NOTE:  Please confirm the sensor type before purchasing. If you have any questions, Email us  picture of your Mass Air Flow Sensor (MAF) to [email protected]. The sensors were updated with the 2020 and newer Lci US models.

See this video sound clip:

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

See other Gen3 Intake Upgrade options:

• K&N Typhoon Intake
• Dinan Intake
• NM Engineering Intake
• Cravenspeed Intake

NM Engineering introduces the intake system for the new 2014+ F56 MINI Coopers. It is a completely bolt-on 'Open-Air-Box' system which gives you the most abundance and unrestricted 360° of air source compared to OEM's sealed air box. A simple 1/2 hour install will get you quicker throttle response, increased power, and more pronounced engine and turbo tunes!

This kit includes Intake Tube in RED

Fits the following models:

2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

NOT compatible with the new 300 hp JCW models.

For the 2020+ Gen3 models with the updated late model MAF sensor, see MINI Cooper Cold Air Intake NM Gen3 from 2020+.

Yes, this product fits both the B48 2.0L engine in the Cooper S as well as the B38 1.5L engine in the Cooper (non-S).

The NM Intake Kit features:

• One piece mandrel bent aluminum tubing
• OEM triangulate mounting locations
• OEM style billet conical mounting posts
• Wall shield between filter and hot radiator reservoir
• Billet Mass Air Flow (MAF) Sensor fitting
• Durable powder coated finish
• Washable filter element

NOTES:

US Models

• Early Sensor 2014 - 2019
• Late Sensor 2020 - up

NON-US Models

• Early Sensor 2014-2017
  Late Sensor (LCI) 2018 - up

See Hi Flow Intake Installation Instructions here.

NOTE:  Please confirm the sensor type before purchasing. If you have any questions, Email us  picture of your Mass Air Flow Sensor (MAF) to [email protected]. The sensors were updated with the 2020 and newer Lci US models.

See this video sound clip:

NOTE: Some States (like California) have ever tightening requirements for emissions testing and inspections. Always check your current local regulations on compliance for street use.

See other Gen3 Intake Upgrade options:

• K&N Typhoon Intake
• Dinan Intake
• NM Engineering Intake
• Cravenspeed Intake