Rennline's stainless steel folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

These tow hooks are designed for track use such as towing a disabled vehicle off the track, or to pull a disabled vehicle onto a flatbed tow truck. It is not designed for towing cars on the street.

Fits the following models:

2014-2020 F56 MINI Cooper and Cooper S Hardtop
2015-2020 F55 MINI Cooper and Cooper S Hardtop 4-Door

See the Application Guide below to see which lengths go with which models.

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 107mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

These tow hooks are designed for track use such as towing a disabled vehicle off the track, or to pull a disabled vehicle onto a flatbed tow truck. It is not designed for towing cars on the street.

Fits the front of following models:

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door

See the Application Guide below to see which lengths go with which models.

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 120mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

These tow hooks are designed for track use such as towing a disabled vehicle off the track, or to pull a disabled vehicle onto a flatbed tow truck. It is not designed for towing cars on the street.

Fits the rear of following models:

2014-2021 F56 MINI Cooper non-S Hardtop
2015-2021 F55 MINI Cooper non-S Hardtop 4-Door

See the Application Guide below to see which lengths go with which models.

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!

Folding Race Tow Hook Application Guide:

Rennline's stainless steel 145mm folding race hooks install in minutes on your MINI with factory screw type removable tow hooks. This is a fully functional and well thought out solution!

These tow hooks are designed for track use such including towing a disabled vehicle off the track, or to pull a disabled vehicle onto a flatbed tow truck. This tow hook is NOT designed for towing cars on the street.

Fits the front and rear of following models:

2014-2022 F56 MINI Cooper S Hardtop
2015-2022 F55 MINI Cooper S Hardtop 4-Door
2016-2022 F57 MINI Cooper S Convertible

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment.

These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to ensure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is Rennline Tow Hooks are the best:

• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Increased Side Load Capacity
• Ability to time the Tow Hook in any position
• Easy Length Adjustment
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Machined "TOW" Graphics
• The original folding tow hook that has proven itself 1000's of times over the years

NOTES: 

The threads on the Rennline Tow Hooks are intentionally made 'thicker' compared to the factory tow hooks.  The threads on the factory tow hooks are made 'thin' in order to allow simple threading by hand and is intended for use only to tow a car onto a flatbed tow truck. 

Unlike the stock tow hook, Rennline Tow Hooks are designed to fit 'tight' so they won't work loose as the car is towed around a track to the paddock. For this reason, the Rennline Tow Hooks will require a wrench to install after about 1/2 turn - this will not damage the screw or bumper beam.  This ensures the Tow Hook will not work loose during towing. Another reason to install these tow hooks BEFORE you go on the track!