× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models :

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible

NOTES: 

  • Does NOT fit the SE models
  •  
  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • Fits models with or without front PDC.
  • Fits models with or without Rally / Driving Lights.
  •  

New and Improved design with:

[ ] Threads built into the plate making it easier to attach the license plate
[ ] The whole plate has steel backing so that it does cannot be bent
[ ] The plate is angled to match the bumper
[ ] Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.


Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Note: Will not fit on F56's that are equipped with the factory rally style driving lights.

Take a look at this video:

 

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

 

 

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57

Mini Cooper Front License Plate Holder Platypus Pro Gen3 F56 F55 F57
Selected: F56 F55 F57 Hardtop & Convertible thru 2021
Part No: G3NMX7300
$117.03
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later
Alternate Products
MINI Cooper No Holes Front License Plate Holder Gen3 F56 F55 F57
$94.07 MINI Cooper No Holes Front License Plate Holder Gen3 F56 F55 F57

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models WITH the factory Rally / Driving Lights:

2016-2022 F54 MINI Cooper and Cooper S Clubman

NOTES:

  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • For MINIs with Rallye Lights, this kit includes an extension arm for clearance.
  • Different product for models with the factory Rally / Driving Lights - select accordingly.

New and Improved design with:

  • Threads built into the plate making it easier to attach the license plate
  • The whole plate has steel backing so that it does cannot be bent
  • The plate is angled to match the bumper
  • Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there, and it will also avoid setting off the sensors on your bumper (if you are having a sensor issue, you may need an extension arm to offset the Platypus - contact us and we will resolve it!) Although it will sit close, the sturdy plate backing will not scratch your bumper no matter how you drive.

Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Take a look at this video:

 

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models WITH the factory Rally / Driving Lights:

2014-2020 F56 MINI Cooper and Cooper S Hardtop
2015-2020 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible

NOTES:

  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • For MINIs with Rallye Lights, this kit includes an extension arm for clearance.
  • Different product for models with the factory Rally / Driving Lights - select accordingly.

New and Improved design with:

  • Threads built into the plate making it easier to attach the license plate
  • The whole plate has steel backing so that it does cannot be bent
  • The plate is angled to match the bumper
  • Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there, and it will also avoid setting off the sensors on your bumper (if you are having a sensor issue, you may need an extension arm to offset the Platypus - contact us and we will resolve it!) Although it will sit close, the sturdy plate backing will not scratch your bumper no matter how you drive.

Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Take a look at this video:

 

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models :

2022-2023 F56 MINI Cooper and Cooper S Hardtop
2022-2023 F55 MINI Cooper and Cooper S Hardtop 4-Door
2022-2023 F57 MINI Cooper and Cooper S Convertible

NOTES: 

  • Does NOT fit the SE models
  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • Fits models with or without front PDC.
  • Fits models with or without Rally / Driving Lights.
  •  

New and Improved design with:

[ ] Threads built into the plate making it easier to attach the license plate
[ ] The whole plate has steel backing so that it does cannot be bent
[ ] The plate is angled to match the bumper
[ ] Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.

Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Note: Will not fit on F56's that are equipped with the factory rally style driving lights.

Take a look at this video:

 

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

 

 

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.  Image shown is an approximation.

Fits the following JCW models:

2017-2023 F60 JCW MINI Cooper S Countryman ALL4

NOTES:

  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • Fits models with or without driving / rally lights.
  • Fits models with or without front PDC.
  • Offroad bumper has NOT been tested.

New and Improved design with:

  • Threads built into the plate making it easier to attach the license plate
  • The whole plate has steel backing so that it does cannot be bent
  • The plate is angled to match the bumper
  • Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Take a look at this video:

 

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models:

2016-2022 F54 MINI Cooper and Cooper S Clubman
2022-2023 F56 JCW Hardtop

NOTES:

  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • If you have the Rallye Lights, order the G3NMX7301D.
  • Different product for models with the factory Rally / Driving Lights - select accordingly.
    This Platypus also fits the 2022 F56 JCW.

New and Improved design with:

  • Threads built into the plate making it easier to attach the license plate
  • The whole plate has steel backing so that it does cannot be bent
  • The plate is angled to match the bumper
  • Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.


Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Note: Will not fit on F56's that are equipped with the factory rally style driving lights.

Take a look at this video:

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.  Fits the Countryman with or without the Rally Lights.  Image shown is an approximation.

Fits the following models with the standard bumper:

2017-2023 F60 MINI Cooper and Cooper S Countryman

NOTES:

  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • Fits models with or without driving / rally lights.
  • Fits models with or without front PDC.
  • Offroad bumper has NOT been tested.

New and Improved design with:

  • Threads built into the plate making it easier to attach the license plate
  • The whole plate has steel backing so that it does cannot be bent
  • The plate is angled to match the bumper
  • Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Take a look at this video:

 

.

Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.

Fits the following models :

2014-2021 F56 MINI Cooper and Cooper S Hardtop
2015-2021 F55 MINI Cooper and Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper and Cooper S Convertible

NOTES: 

  • Does NOT fit the SE models
  •  
  • The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
  • Fits models with or without front PDC.
  • Fits models with or without Rally / Driving Lights.
  •  

New and Improved design with:

[ ] Threads built into the plate making it easier to attach the license plate
[ ] The whole plate has steel backing so that it does cannot be bent
[ ] The plate is angled to match the bumper
[ ] Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)

Fits Right and Will Not Alarm your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.


Tough Construction and Rigid Design, Made in the USA!

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.

Note: Will not fit on F56's that are equipped with the factory rally style driving lights.

Take a look at this video:

 

For Gen 2 2007-2013 MINIs, see G2NMX7307.

For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.

 

 

 
 
Question:
Will this fit my 21 MINI Cooper Countryman the bumper in the picture is different from what I have on.
Answer:
Yes, the G3NMX7302 Platypus license holder fits all F60 Countryman models from 2017 thru 2022.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
Find the best MINI Cooper no drill License Plate Holder
Created: July 27, 2015
Mini Cooper Platypus License Plate Holder. For MINI owners living in areas that require the front license plate, but don't want to drill holes in the front bumper, the Platypus is your answer.