Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.
Fits the following models :
2022-2023 F56 MINI Cooper and Cooper S Hardtop
2022-2023 F55 MINI Cooper and Cooper S Hardtop 4-Door
2022-2023 F57 MINI Cooper and Cooper S Convertible
NOTES:
- Does NOT fit the SE models
- The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
- Fits models with or without front PDC.
- Fits models with or without Rally / Driving Lights.
New and Improved design with:
[ ] Threads built into the plate making it easier to attach the license plate
[ ] The whole plate has steel backing so that it does cannot be bent
[ ] The plate is angled to match the bumper
[ ] Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)
Fits Right and Will Not Alarm your PDC Sensors
We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.
Tough Construction and Rigid Design, Made in the USA!
The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.
Note: Will not fit on F56's that are equipped with the factory rally style driving lights.
Take a look at this video:
For Gen 2 2007-2013 MINIs, see G2NMX7307.
For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.
Install your front license plate WITHOUT drilling holes in your bumper! This ingenious PLATYPUS PRO SERIES license plate bracket uses the front tow hook attachment point for a nice clean look.
Fits the following models :
2022-2023 F56 MINI Cooper and Cooper S Hardtop
2022-2023 F55 MINI Cooper and Cooper S Hardtop 4-Door
2022-2023 F57 MINI Cooper and Cooper S Convertible
NOTES:
- Does NOT fit the SE models
- The Bracket for the F-Series is offset to the side in order to avoid covering the fog lights.
- Fits models with or without front PDC.
- Fits models with or without Rally / Driving Lights.
New and Improved design with:
[ ] Threads built into the plate making it easier to attach the license plate
[ ] The whole plate has steel backing so that it does cannot be bent
[ ] The plate is angled to match the bumper
[ ] Only 7-pieces in the kit to greatly simplify installation (the plate and 2 pieces of hardware, and 4 screws for the plate)
Fits Right and Will Not Alarm your PDC Sensors
We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there. This kit will come with a blinder to be used if your MINI is equipped with PDC. The Plate will be covering one of the parking sensors on your Clubman. The blinder is just a little round sticker the size of the sensor, it will not be visible since it will be behind the plate. When in place that sensor will not be able to detect anything in front of it. The rest of the sensors and the parking system will work, but that one will not. If you have PDC and rely on this system to park your car then the Platypus is not for you.
Tough Construction and Rigid Design, Made in the USA!
The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware.
Note: Will not fit on F56's that are equipped with the factory rally style driving lights.
Take a look at this video:
For Gen 2 2007-2013 MINIs, see G2NMX7307.
For the R60 COUNTRYMAN, see G2NMX7304 or G2NMA2510.
Mini Mania Tech Team
The MINI Cooper Parts and Accessories Experts
Loading...
Loading...
Loading...
Loading...
Loading...