Classic Austin Mini Twin Point Mpi Twin Point Performance Cylinder Head

Road Sport and high performance race Cylinder heads are options when upgrading your engine. We offer both cast iron and alloy heads for street and race. Technical Information & guidance is available by live chat, phone or e-mail.

The engine build I recently covered in previous Mini Magazine issues developed into a bit of an ongoing 'project'. During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed.

Everybody has their own opinion on this subject. The most experienced people will tell you that the best way to maintain your engine performance is to accept the fact that valve jobs need to be done 2 or 3 times more often than rings and bearings! And this data base was concluded when leaded gas was the norm! Now that unleaded is all you can get, valve jobs are needed even more often! The purpose of a valve job is two fold; first the valve seats. The impurities in the air and gas often get trapped between the valve and the seat in the head; under worst conditions stopping the valve from closing, but more commonly being smashed enough to allow just a little seepage of hot gases.