Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

These stainless steel brake lines maintain consistent brake pressure and precision brake modulation, especially during threshold braking. They are manufactured to meet DOT Compliance Standards, and every line is 100% tested to a pressure of 4500 psi. The Teflon® inner brake line is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The stainless steel braid covering provides support for the Teflon line and is extremely durable against incidental impact and abrasion. Finally, these brake lines are coated with a clear abrasion resistant cover for maximum protection against chafing. All necessary brackets and fasteners are included with each line kit.

These Brake lines are compatible with JCW Big Brake Kits.

MINI recommends brake fluid replacement every 2 years, more often if you track your MINI.

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Fits:

05/2003-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertibles

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

For other Stainless Steel Brake Line options, see NMB1003-P.

Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.

Brake fluid should be replaced every 2 years, more often if you track your MINI.  For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul RACING Brake Fluid - Better
• Castrol React SRF RACING Brake Fluid - Best
• Brembo Performance LCF600 Brake Fluid - Great Value!

For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Fits:

05/2003-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertibles

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

For other Stainless Steel Brake Line options, see NMB1003-P.

Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.

Brake fluid should be replaced every 2 years, more often if you track your MINI.  For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul RACING Brake Fluid - Better
• Castrol React SRF RACING Brake Fluid - Best
• Brembo Performance LCF600 Brake Fluid - Great Value!

For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Adding a set of these stainless steel brake lines to your MINI will provide an immediate improvement to brake performance and pedal feel from the very first stop. Front Set Only.

Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertibles

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

For other Stainless Steel Brake Line options, see NMB1003-P.

These Brake lines are compatible with JCW Big Brake Kits.

Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.

Brake fluid should be replaced every 2 years, more often if you track your MINI.  For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul RACING Brake Fluid - Better
• Castrol React SRF RACING Brake Fluid - Best
• Brembo Performance LCF600 Brake Fluid - Great Value!

For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Fits:

2002-03/2003 R50 MINI Cooper and R53 Cooper S Hatchback

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

For other Stainless Steel Brake Line options, see NMB1003-P.

These Brake lines are compatible with JCW Big Brake Kits.

Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.

Brake fluid should be replaced every 2 years, more often if you track your MINI.  For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul RACING Brake Fluid - Better
• Castrol React SRF RACING Brake Fluid - Best
• Brembo Performance LCF600 Brake Fluid - Great Value!

For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Adding a set of these stainless steel brake lines to any MINI will provide an immediate improvement to brake performance and pedal feel from the very first stop. Rear Set Only.

Fits listed Models:

2002-04/2003 R50 MINI Cooper and R53 Cooper S Hatchback

NOTE:

[ ] MINIs with production dates in or before April 2003 have a banjo fitting where the rear hose attaches to caliper.
[ ] MINIs with production date of May 2003 and later does not have the banjo fitting at the rear caliper - threads directly into caliper).

For other Stainless Steel Brake Line options, see NMB1003-P.

Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.

Brake fluid should be replaced every 2 years, more often if you track your MINI.  For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul RACING Brake Fluid - Better
• Castrol React SRF RACING Brake Fluid - Best
• Brembo Performance LCF600 Brake Fluid - Great Value!

For 'standard' replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.