If you have trouble getting your front alignment to spec, or feel your car 'wandering' down the freeway, there is a possibility you need this bushing replaced. If you see a fluid leak from this bracket, it's time to replace it.

Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

Left side and Right side available, sold individually.

For the do-it-yourself'r, replacing this entire bracket with the bushing will save you a lot of time for little added expense. You also won't need the BMW 'special tool' if you replace the entire bracket with bushing already installed. This bracket with bushing goes on the rear end of the front lower control arm.

If you prefer to get the bushing without the bracket, see NMS7610.

For the performance minded, see the Powerflex Polyurethane Bushings.

Aftermarket replacement Bushing with Bracket for the LEFT SIDE Front Lower Control Arm. A cost effective alternative to the factory replacement. Sold each.

Left side is the drivers side and right side is the passenger side in USA model MINIs.

If you have trouble getting your front alignment to spec, or feel your car 'wandering' down the freeway, there is a possibility you need this bushing replaced. If you see a fluid leak from this bracket, it's time to replace it.

Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

For the do-it-yourself'r, replacing this entire bracket with the bushing will save you a lot of time for little added expense. You also won't need the BMW 'special tool' if you replace the entire bracket with bushing already installed. This bracket with bushing goes on the rear end of the front lower control arm.

For the MINI factory replacement, see NMS7615-P.

If you prefer to get the bushing without the bracket, see NMS7610.

For the performance minded, see the Powerflex Polyurethane Bushings.

Aftermarket replacement Bushing with Bracket for the RIGHT SIDE Front Lower Control Arm. A cost effective alternative to the factory replacement. Sold each.

Left side is the drivers side and right side is the passenger side in USA model MINIs.

If you have trouble getting your front alignment to spec, or feel your car 'wandering' down the freeway, there is a possibility you need this bushing replaced. If you see a fluid leak from this bracket, it's time to replace it.

Fits:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

For the do-it-yourself'r, replacing this entire bracket with the bushing will save you a lot of time for little added expense. You also won't need the BMW 'special tool' if you replace the entire bracket with bushing already installed. This bracket with bushing goes on the rear end of the front lower control arm.

For the MINI factory replacement, see NMS7615-P.

If you prefer to get the bushing without the bracket, see NMS7610.

For the performance minded, see the Powerflex Polyurethane Bushings.