× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items
Lower suspension arms to give 2.0 degrees of negative camber. Sold in pairs only.
General:
Negative camber lower arms are specifically forged in different degrees to give 1.5 (C-AJJ3364), 2.0 (C-AJJ3364A) or 2.5 degrees (C-AJJ3364B) more negative camber. All are heat-treated and crack-tested for safety.
See C-AJJ3363 for adjustable lower arms, and C-AJJ 3365 for adjustable tie rods.
Classic Mini Negative Camber 2 Degrees Lower Front Arm Pair

Classic Mini Negative Camber 2 Degrees Lower Front Arm Pair

Classic Mini Negative Camber 2 Degrees Lower Front Arm Pair
Part No: C-AJJ3364A
$132.95
Qty:
Fits the following:
Classic Mini
PayPal Pay Later
Alternate Products
Classic Austin Mini Negative Camber 1.5 Degrees Lower Front Arm Kit Pair
$59.30 Classic Austin Mini Negative Camber 1.5 Degrees Lower Front Arm Kit Pair
Lower suspension arms to give 2.0 degrees of negative camber. Sold in pairs only.
General:
Negative camber lower arms are specifically forged in different degrees to give 1.5 (C-AJJ3364), 2.0 (C-AJJ3364A) or 2.5 degrees (C-AJJ3364B) more negative camber. All are heat-treated and crack-tested for safety.
See C-AJJ3363 for adjustable lower arms, and C-AJJ 3365 for adjustable tie rods.
 
 
Question:
hello, do you have front and rear available? I have a Austin mini 1980.
 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
How to Improve the Handling of Your Mini - The Basics
Created: July 16, 2007
Mini handling is like a bottle of wine? It all depends on who is driving (or drinking the wine)! Experience, technique, expectations all result in a different formula for success.
Classic Mini Cooper SUSPENSION - Basic Priorities
Created: February 20, 2001
Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory.
BRAKES - Fitting discs and required ancillaries
Created: December 10, 2000
What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.
BRAKES - Fundamental considerations
Created: December 06, 2000
Most folks immediately turn to considering higher engine power outputs. Because of this pre-occupation brakes tend to slide down the improvements priority list. However, they are far more important...