Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rotor sizes
Front: 316mm x 22mm
Rear: 280mm x 10mm
Image shown is a generic image, not the actual product.
Fits the following JCW models:
2007-2013 R56 JCW MINI Cooper S Hatchback
2008-2014 R55 JCW MINI Cooper S Clubman
2009-2015 R57 JCW MINI Cooper S Convertibles
2012-2015 R58 JCW MINI Cooper S Coupe
2012-2015 R59 JCW MINI Cooper S Roadster
Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where StopTech SportStop slotted brake rotors make a big difference. StopTech SportStop Slotted Brake Rotors are a true performance rotors.
FEATURES:
- Power Alloy castings
- Engineered Performance Rotor
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon)content that extends reliability, service life and helps reduce NVH “noise” issues
- Rotor material is a direct descendant of the patented AeroRotor from StopTech
- Introducing directional curve vane design
- Improved vane design or OE equivalent on all rotors
- Center split castings
- New short slot design runs perpendicular to the vane to preserve rotor strength.
- Direct OE Replacement
- Improved wet weather response
- Increased initial “bite”
- Double disc ground for a consistent friction surface and Improved pad bed-in
- Mill balanced
- Black E-Coated non-friction surfaces on “Power Alloy” rotors
- Enhances open wheel appearance
Choose position. Sold Individually.
Direct fit for JCW models.
If your brake wear warning light is illumninated, see replacement brake wear sensors.
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Torque Racing Brake Fluid - Best
Select a "Position" from below.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rotor sizes
Front: 316mm x 22mm
Rear: 280mm x 10mm
Image shown is a generic image, not the actual product.
Fits the following JCW models:
2007-2013 R56 JCW MINI Cooper S Hatchback
2008-2014 R55 JCW MINI Cooper S Clubman
2009-2015 R57 JCW MINI Cooper S Convertibles
2012-2015 R58 JCW MINI Cooper S Coupe
2012-2015 R59 JCW MINI Cooper S Roadster
Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where StopTech SportStop slotted brake rotors make a big difference. StopTech SportStop Slotted Brake Rotors are a true performance rotors.
FEATURES:
- Power Alloy castings
- Engineered Performance Rotor
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon)content that extends reliability, service life and helps reduce NVH “noise” issues
- Rotor material is a direct descendant of the patented AeroRotor from StopTech
- Introducing directional curve vane design
- Improved vane design or OE equivalent on all rotors
- Center split castings
- New short slot design runs perpendicular to the vane to preserve rotor strength.
- Direct OE Replacement
- Improved wet weather response
- Increased initial “bite”
- Double disc ground for a consistent friction surface and Improved pad bed-in
- Mill balanced
- Black E-Coated non-friction surfaces on “Power Alloy” rotors
- Enhances open wheel appearance
Choose position. Sold Individually.
Direct fit for JCW models.
If your brake wear warning light is illumninated, see replacement brake wear sensors.
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Torque Racing Brake Fluid - Best
StopTech® Slotted Rear Left Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rear Rotor: 280 x 10mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
Mini Cooper Brake Rotor JCW Slotted Rear Left Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Rear Left Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Rear Left Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Rear Left Gen2 R55-R59
MORE BRAKE ROTOR UPGRADES!
see our Mini Cooper Brake Rotor Application Guide.
OEM BRAKE ROTORS!
see our Mini Cooper OEM Brake Rotor Application Guide.
StopTech® Slotted Rear Left Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rear Rotor: 280 x 10mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
StopTech® Slotted Rear Right Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rear Rotor: 280 x 10mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
Mini Cooper Brake Rotor JCW Slotted Rear Right Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Rear Right Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Rear Right Gen2 R55-R59
MORE BRAKE ROTOR UPGRADES!
see our Mini Cooper Brake Rotor Application Guide.
OEM BRAKE ROTORS!
see our Mini Cooper OEM Brake Rotor Application Guide.
StopTech® Slotted Rear Right Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rear Rotor: 280 x 10mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
StopTech® Slotted Front Right Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Front Rotor: 316 x 22mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
Mini Cooper Brake Rotor JCW Slotted Front Right Gen2 R55-R59Mini Cooper Brake Rotor JCW Slotted Front Right Gen2 R55-R59
MORE BRAKE ROTOR UPGRADES!
see our Mini Cooper Brake Rotor Application Guide.
OEM BRAKE ROTORS!
see our Mini Cooper OEM Brake Rotor Application Guide.
StopTech® Slotted Front Right Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Front Rotor: 316 x 22mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
StopTech® Slotted Front Left Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Front Rotor: 316 x 22mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
MORE BRAKE ROTOR UPGRADES!
see our Mini Cooper Brake Rotor Application Guide.
OEM BRAKE ROTORS!
see our Mini Cooper OEM Brake Rotor Application Guide.
StopTech® Slotted Front Left Sport Rotor - the one-piece performance upgrade rotors from StopTech, the best aftermarket performance upgrade rotors around. Sold Individually.
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Front Rotor: 316 x 22mm
Fits the following JCW models:
2007-2013 R56 MINI JCW Cooper S Hatchback
2008-2014 R55 MINI JCW Cooper S Clubman
2009-2015 R57 MINI JCW Cooper S Convertibles
2012-2015 R58 MINI JCW Cooper S Coupe
2012-2015 R59 MINI JCW Cooper S Roadster
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech® Slotted, Cross-Drilled or Drilled & Slotted Sport Rotors.
StopTech® slotted, drilled and drilled & slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every StopTech® Sport Rotor is produced from a high quality Centric Parts® blank casting and finished in a durable e-coating for corrosion resistance.
STOPTECH SPORT ROTOR APPLICATION GUIDE
Hardtop, Clubman, Convertible, Coupe, and Roadster
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2630L | G2NMB2630R | G2NMB2061L | G2NMB2061R |
COOPER S | 294 x 22mm | G2NMB2060L | G2NMB2060R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2604L | G2NMB2604R | G2NMB2605L | G2NMB2605R | |
DRILLED | COOPER | 280 X 22mm | 259 x 10mm | G2NMB2631L | G2NMB2631R | G2NMB2601L | G2NMB2601R |
COOPER S | 294 x 22mm | G2NMB2600L | G2NMB2600R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2606L | G2NMB2606R | |||
DRILLED & SLOTTED |
COOPER | 280 X 22mm | 259 x 10mm | G2NMB2632L | G2NMB2632R | G2NMB2603L | G2NMB2603R |
COOPER S | 294 x 22mm | G2NMB2602L | G2NMB2602R | ||||
JCW | 316 x 22mm | 280 x 10mm | G2NMB2607L | G2NMB2607R |
STOPTECH SPORT ROTOR APPLICATION GUIDE
Countryman and Paceman
TYPE | MODEL | ROTOR SIZE | FRONT | REAR | |||
FRONT | REAR | LEFT | RIGHT | LEFT | RIGHT | ||
SLOTTED | COOPER | 294 x 22mm | 280 x 10mm | G2NMB2620L | G2NMB2620R | G2NMB2611L | G2NMB2611R |
COOPER S | 307 x 24mm | G2NMB2610L | G2NMB2610R | ||||
JCW | 296 x 10mm | G2NMB2635L | G2NMB2635R | ||||
DRILLED | COOPER | 294 x 22mm | 280x 10mm | G2NMB2621L | G2NMB2621R | G2NMB2613L | G2NMB2613R |
COOPER S | 307 x 24mm | G2NMB2612L | G2NMB2612R | ||||
JCW | 296 x 10mm | NOT AVAILABLE | |||||
DRILLED & SLOTTED |
COOPER | 294 x 22mm | 280 x 10mm | G2NMB2622L | G2NMB2622R | G2NMB2615L | G2NMB2615R |
COOPER S | 307 x 24mm | G2NMB2614L | G2NMB2614R | ||||
JCW | 296 x 10mm | NOT AVAILABLE |
FEATURES
- Direct replacement, stock-sized rotors that fit stock calipers
- Increased initial bite response
- Improved wet weather response
- Reduced brake pad glazing
- OE vane designs, including casting part line location
- Machining designs engineered for optimal rotor integrity
- Double-disc ground for a consistent friction surface and better pad bed-in
- Mill-balanced for vibration-free performance
- Black e-coating on non-friction surfaces provides lasting, attractive looks
- Enhances open wheel appearance
*E-Coated Finish*
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
NOTES
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
Brake fluid should be replaced every 2 years, more often if you track your Mini.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Castrol React SRF Brake Fluid - Best
Left side is the drivers side and right side is the passenger side in USA model MINIs.
Rotor sizes
Front: 316mm x 22mm
Rear: 280mm x 10mm
Image shown is a generic image, not the actual product.
Fits the following JCW models:
2007-2013 R56 JCW MINI Cooper S Hatchback
2008-2014 R55 JCW MINI Cooper S Clubman
2009-2015 R57 JCW MINI Cooper S Convertibles
2012-2015 R58 JCW MINI Cooper S Coupe
2012-2015 R59 JCW MINI Cooper S Roadster
Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where StopTech SportStop slotted brake rotors make a big difference. StopTech SportStop Slotted Brake Rotors are a true performance rotors.
FEATURES:
- Power Alloy castings
- Engineered Performance Rotor
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon)content that extends reliability, service life and helps reduce NVH “noise” issues
- Rotor material is a direct descendant of the patented AeroRotor from StopTech
- Introducing directional curve vane design
- Improved vane design or OE equivalent on all rotors
- Center split castings
- New short slot design runs perpendicular to the vane to preserve rotor strength.
- Direct OE Replacement
- Improved wet weather response
- Increased initial “bite”
- Double disc ground for a consistent friction surface and Improved pad bed-in
- Mill balanced
- Black E-Coated non-friction surfaces on “Power Alloy” rotors
- Enhances open wheel appearance
Choose position. Sold Individually.
Direct fit for JCW models.
If your brake wear warning light is illumninated, see replacement brake wear sensors.
MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.
For High Performance Brake Fluids, see the following:
- Ate Performance Brake Fluid - Very Good
- Motul Racing Brake Fluid - Better
- Torque Racing Brake Fluid - Best
Loading...
Loading...
Loading...
Loading...
Loading...
- Home
- Related Websites
- Products
- Articles & Help
- Social
- Visit us on:
-
Mini Mania
870 Gold Flat Rd.
Nevada City, CA 95959 USAPhone: 530.470.8300
Fax: 530.470.8388
Your Login Failed.
Your E-Mail and/or password are incorrect. Please try again.
Passwords are case-sentive.
If you continue to have problems click on the Help Icon for additional options.
Login with your E-Mail Address. If you would like your login information reset, click on the button below to request your login information to be resent.