Fits the following models with the N14 engine:

2007-2010 R56 MINI Cooper S Hardtop
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57MINI Cooper S Convertible

2011-07/2012 R58 JCW MINI Cooper S Coupe
2012-07/2012 R59 JCW MINI Cooper S Roadster

For the Cooper non-S Model, see G2NME3299.

Have a Question or Comment of your own? Click here!

Mini Cooper S OEM  Valve Cover Kit  for the  N18 engine.  

Valve Cover Kit includes:

• Valve Cover.
•  Oil Filler Cap.
• Spark Plug Tube Seals
•  Valve Cover Gasket.

Fits the following Cooper S models with the N18 engine:

• 2011-2013 R56 MINI Cooper S Hatchback.
• 2011-2014 R55 MINI Cooper S Clubman.
• 2011-2015 R57 MINI Cooper S Convertible.
• 2012-2015 R58 MINI Cooper S Coupe.
• 2012-2015 R59 MINI Cooper S Roadster.
• 2011-2016 R60 MINI Cooper S Countryman.
• 2013-2016 R61 MINI Cooper S Paceman.

Also compatible with JCW models with the N18 engine.

Unlike the simple 'valve cover' on past vehicles, the MINI Cooper Valve Cover does a lot more:

• Seals top of the Cylinder Head from the outside.
• Provides sound Insulation.
• Accommodates Crankcase Breather Outlet.
• Accommodates Oil Separation System.
• Accommodates Pressure Relief Valve for Crankshaft Venting System.
• Accommodates  attachment of Sensors.
• Shields  from Electromagnetic Waves produced by the Ignition Coils. (electromagnetic compatibility, EMC).
• Accommodates  Ignition Coils.

The PCV design is updated on the N18. Rather than an external hose on the passenger side, the Vacuum Line is internal to the Valve Cover. The intent is  to reduce propensity for effluents pooling in the Intake Manifold. The boost line between the Valve Cover and Turbo Intake Pipe is also different but functionally equivalent.

Tightening Torque
Valve Cover to Cylinder Head: 10 Nm or 7.4 ft-lbs

Have a Question or Comment of your own? Click here!

[ ] Cooper S Valve Cover

Fits the following models with the N14 engine:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S Clubman
2009-2010 R57 MINI Cooper S Convertible

Also compatible with JCW models with the N14 engine.

Valve Cover includes Oil Filler Cap, Seals, and Gasket.

Unlike the simple 'valve cover' on past vehicles, the MINI valve cover does a lot more:

• Sealing the top of the cylinder head from the outside
• Sound insulation
• Accommodation of crankcase breather outlet
• Accommodation of oil separation system
• Accommodation of pressure relief valve for crankshaft ventint system
• Attachment of sensors
• Shielding of outside from electromagnetic waves produced by the ignition coils (electromagnetic compatibility, EMC)
• Accommodation of ignition coils

On the N12 (Cooper) and N14 (Cooper S) engines, the crankcase ventilation system is considered a “regulated” system. This means that the flow of crankcase gasses is controlled with respect to crankcase pressure and intake manifold pressure (vacuum).

While both the N12 and N14 engines have a regulated crankcase venting system, each engine uses different methods of oil separation. The N12 engine separates oil from crankcase gasses using the “labyrinth” method. The N14 uses a “helix” or cyclone separator.

Both engines use a crankcase pressure control valve to maintain the required flow of gasses into the intake manifold.

The crankcase venting system on the N12 engine consists of a pressure control valve and a labyrinth oil separation system which is self contained in the cylinder head cover assembly.

The N14 engine differs in many areas from the N12 and the crankcase venting system is no different in this regard. The requirements for the crankcase venting system are slightly different. The N14 engine is turbocharged which greatly influences intake manifold pressure and hence, the operation of the pressure control valve.

Therefore the crankcase venting system is designed to function in two modes. One mode, is under load and the other is during decel or idle. There is a check valve in the cylinder head cover to prevent boost air from the turbocharger from entering into the crankcase.

Tightening Torque
Valve Cover to Cylinder Head: 10 Nm or 7.4 ft-lbs

Have a Question or Comment of your own? Click here!

Fits the following models with the N12 and N16 engines:

2007-2013 R56 MINI Cooper Hardtop
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertible
2011-2015 R58 MINI Cooper Coupe
2012-2016 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

For the Cooper S Model, see G2NME3300.

Have a Question or Comment of your own? Click here!

Fits the following models with the N18 engine:

2011-2013 R56 MINI Cooper S Hardtop
2011-2014 R55 MINI Cooper S Clubman
2011-2015 R57 MINI Cooper S Convertible
2011-2015 R58 MINI Cooper S Coupe
2011-2015 R59 MINI Cooper S Roadster
2011-2016 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

For 2007-2010 Cooper S models, see G2NME3300. Same for the following JCW models:

2011-07/2012 R58 JCW Cooper S Coupe
2012-07/2012 R59 JCW Cooper S Roadster

For the Cooper non-S Model, see G2NME3299.

Have a Question or Comment of your own? Click here!

Fits the following Cooper non-S models with the N12 and N16 engines:

2007-2013 R56 MINI Cooper Hatchback
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertible
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

[ ] Cooper Valve Cover

Valve Cover includes Oil Filler Cap, Seals, and Gasket.

For a list of all Valve Cover options, see G2NME8050-P.

Tightening Torque
Valve Cover to Cylinder Head: 10 Nm or 7.4 ft-lbs

Have a Question or Comment of your own? Click here!