× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
MINI Cooper Rear Brake Pad Carbotech XP8 Gen3 F55 F56 F57

MINI Cooper Rear Brake Pad Carbotech XP8 Gen3 F55 F56 F57

MINI Cooper Rear Brake Pad Carbotech XP8 Gen3 F55 F56 F57
Selected: XP8 Rear Set
Part No: G3NMB2312
$220.95
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)

Carbotech™ AX6™ Performance REAR BRAKE Pads specifically engineered for Track applications. These pads are not slotted for brake wear sensors.

Fits the following Cooper S models:

2014-2021 F56 MINI Cooper S Hardtop
2015-2021 F55 MINI Cooper S Hardtop 4-Door
2016-2021 F57 MINI Cooper S Convertible

A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers.

Brake fluid should be replaced every 2 years, more often if you track your MINI.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

Loading...
Loading...
Loading...
Related Technical Articles:
Find the best Carbotech™ Brake Pad for your MINI Cooper
Created: June 16, 2016
Mini Cooper Carbotech™ Performance Brake Pad Upgrade Application Guide to help identify which Carbotech Brake Pads will best meet your needs. From performance street pads to full race pads, Carbotech has the solution for your Mini Cooper and Cooper S models.
CARBOTECH Brake Pad Bedding In Process
Created: August 25, 2011
BED IN PROCEDURE FOR THE BOBCAT STREET PADS Brake from 60mph down to 30mph about 4-6 times. Then let your brakes cool for about 2-3 minutes while driving. Repeat step # 1. Allow the brake pads and discs to cool down to ambient temperature (about 30 minutes or more). NOTE: Proper bedding of pads & rotors will result in greater performance and longer pad & rotor wear.
Loading...
Loading...
Loading...
Recently Viewed Items