× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
MINI Cooper S SPEC Stage 2+ Clutch Kit Gen3 F55 F56 F57 F54 F60

MINI Cooper S SPEC Stage 2+ Clutch Kit Gen3 F55 F56 F57 F54 F60

MINI Cooper S SPEC Stage 2+ Clutch Kit Gen3 F55 F56 F57 F54 F60
Selected: Stage 2+
Part No: G3NMG1602
$1115.99
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)
Alternate Products
Mini Cooper S Performance Clutch Kits Gen3 F55 F56 F57 F54 F60
Mini Cooper S Performance Clutch Kits Gen3 F55 F56 F57 F54 F60
Mini Cooper Clutch Kit OEM Gen3 F55 F56 F57 F54 F60
Mini Cooper Clutch Kit OEM Gen3 F55 F56 F57 F54 F60

Stage 2 PLUS Performance Clutch Upgrade kit! Features an unsprung solid hub multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. Heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift.

Image shown is an approximation and not the actual product.

Fits the following Cooper S models with the 2.0 liter 4 cylinder engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

Stage 2 PLUS Performance Clutch Kit for the MINI is a perfect upgrade for all modified engines making more torque than the stage 2 can support. Maintains stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. For Street, Drag, Road Race, Rallye, Pulling, Autocross.

INCLUDES

[ ] High clamp pressure plate 
[ ] Hybrid Kevlar and Carbon-Graphite friction material
[ ] High torque solid hub and disc assembly 

Features high clamp pressure plate, composite multi-friction carbon-kevlar material, high torque rigid hub disc assembly, and bearing.

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature higher clamp loads than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

Always replace the flywheel bolts once the flywheel is removed - here are the MINI factory replacement Flywheel Bolts.

Pressure Plate mounting bolts torque specs:

  Type Thread Tightining spec Torque
Clutch to flywheel F54 F55 F56 F57 F60 M8 Replace screws

Jointing torque
Angle of rotation


15 Nm
90°

Flywheel mounting bolts torque specs:

  Type Thread Tightening spec Torque
Flywheel to crankshaft B46 / B48 M12 x 1.5 Renew screws 120 Nm

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.

 

Recommended items for: G3NMG1602
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Recently Viewed Items