× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Designed for the street and track, this Wilwood Front Big Brake kit increases stopping power while greatly reducing brake fade.

This kit requires the Wilwood Front Brake lines which must be ordered separately.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and S Convertible

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible

Not compatible with the Countryman which uses 5-lug wheels.

For the O-Ring Seal Kit to rebuild these calipers, see NMB2070.
For the 11.75" Big Brake Kit for Track use, see NMB2044.
For the Rear Brake Upgrade Kit, see NMB2055.

Most stock OEM wheels will need spacers to fit (use template below to confirm fitment before ordering - clearance will vary depending on the wheel).

Includes:

Forged Billet DynaPro 4 Piston Calipers - Stress flow forging re-aligns the metal's grain structure eliminating the stresses and interruptions to the internal grain structure. FEA generated radial transition design substantially increases resistance to deflection and caliper separation.

7816 "Q" compound Polymatrix Pads - Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.

GT Series Rotor Mounting Hats - Lightweight and strong, these hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. Black anodized finish prevents corrosion and enhances appearance.

SRP Series 12.19" Vented Iron Rotors - Adds stopping power and cooling capacity over smaller diameter OE rotors. Premium grade, long grain carbon iron provides long wear with high thermal stability and resistance to distortion. Venting and cleaning action of the holes and slots reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on rotor faces. This results in smoother engagement with improved consistency and response at the pedal. Treated with silver zinc wash, these rotors resist corrosion.

Caliper Brackets and Hardware - Aluminum mount brackets with steel threaded bolt inserts are lightweight and stong. Each bracket is CNC machined for precise fit. Grade 8 or higher and AN style nuts, bolts studs, washers, and alignment shims are included in all applicable kits.

Note: Installation of Wilwood Disc Brakes may affect the wheel offset.

Matching Brake Lines (NMB2043) must be ordered separately.

CHECK BRAKE CALIPER TEMPLATE BEFORE ORDERING. Use this template to ensure compatibility with your wheels - Big Brake Kits require more space behind the spokes to clear the caliper. In some cases, spacers  may provide the necessary clearance.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

 

For Wilwood Big Brake Kit, see NMB2041-P.

For Wilwood Big Brake Kit replacement Brake Pads, see NMB2045-P.

For Wilwood Big Brake Kit replacement rotors, see NMB2047-P.

For Wilwood Big Brake Caliper, replacement Pistons, see NMB2071.

For Wilwood Big Brake Caliper Rebuild O-Ring Kit, see NMB2070.

Mini Cooper Front Big Brake Kit Wilwood 12.19 Black Calipers and Drilled & Slotted

Mini Cooper Front Big Brake Kit Wilwood 12.19 Black Calipers and Drilled & Slotted

Mini Cooper Front Big Brake Kit Wilwood 12.19 Black Calipers and Drilled & Slotted

Mini Cooper Front Big Brake Kit Wilwood 12.19 Black Calipers and Drilled & Slotted

Mini Cooper Front Big Brake Kit Wilwood 12.19 Black Calipers and Drilled & Slotted
Selected: Black Calipers w/ Drilled & Slotted rotors
Part No: NMB2041
$1384.99
Qty:
Specially Priced. Discounts Do Not Apply.
Fits the following:
MINI (2002-Current)
Alternate Products
Mini Cooper Front Big Brake Kit Wilwood 11.75 inch Track | GEN1 & GEN1 MINI Coopers
$1316.99 Mini Cooper Front Big Brake Kit Wilwood 11.75 inch Track | GEN1 & GEN1 MINI Coopers
Brake lines required for the Wilwood Big Brake Kit (NMB2041 & NMB2044).

Brake fluid should be replaced every 2 years. See ATE Performance Brake Fluid for replacement brake fluid. ATE® Type 200 Amber is a high quality performance fluid that will last much longer than the standard DOT4 fluid. This is an ABS friendly fluid.

ATE® TYPE 200 Amber has a dry boiling point of 536F and a wet boiling point of 396F which far exceeds standard brake fluids meeting the DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. 100% synthetic fluid is specifically designed to resist the high temperatures of racing brakes and yet very suitable for daily driving.

For Wilwood Big Brake Kit, see NMB2041-P.

Brake fluid should be replaced every 2 years, more often if you track your MINI.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

 

A high-performance Big Brake Kit in RED with plain rotors for the MINI. Designed for the street and track, this brake kit increases stopping power while greatly reducing brake fade.

This kit requires the Wilwood Front Brake lines which must be ordered separately.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible

Not compatible with the Countryman or Paceman which uses 5-lug wheels.

For the O-Ring Seal Kit to rebuild these calipers, see NMB2070.
For the 11.75" Big Brake Kit for Track use, see NMB2044.
For the Rear Brake Upgrade Kit, see NMB2055.

Most stock OEM wheels will need spacers to fit (use template below to confirm fitment before ordering - clearance will vary depending on the wheel).

This Big Brake Kit includes:

Forged Billet DynaPro 4 Piston Calipers - Stress flow forging re-aligns the metal's grain structure eliminating the stresses and interruptions to the internal grain structure. FEA generated radial transition design substantially increases resistance to deflection and caliper separation.

7816 "Q" compound Polymatrix Pads - Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.

GT Series Rotor Mounting Hats - Lightweight and strong, these hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. Black anodized finish prevents corrosion and enhances appearance.

SRP Series 12.19" Vented Iron Rotors - Adds stopping power and cooling capacity over smaller diameter OE rotors. Premium grade, long grain carbon iron provides long wear with high thermal stability and resistance to distortion. Venting and cleaning action of the holes and slots reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on rotor faces. This results in smoother engagement with improved consistency and response at the pedal. Treated with silver zinc wash, these rotors resist corrosion.

Caliper Brackets and Hardware - Aluminum mount brackets with steel threaded bolt inserts are lightweight and stong. Each bracket is CNC machined for precise fit. Grade 8 or higher and AN style nuts, bolts studs, washers, and alignment shims are included in all applicable kits.

Note: Installation of Wilwood Disc Brakes may affect the wheel offset.

CHECK BRAKE CALIPER TEMPLATE BEFORE ORDERING. Use this template to ensure compatibility with your wheels - Big Brake Kits require more space behind the spokes to clear the caliper. In some cases, spacers  may provide the necessary clearance.

For Wilwood Big Brake Kit, see NMB2041-P.

For Wilwood Big Brake Kit replacement Brake Pads, see NMB2045-P.

For Wilwood Big Brake Kit replacement rotors, see NMB2047-P.

For Wilwood Big Brake Caliper, replacement Pistons, see NMB2071.

For Wilwood Big Brake Caliper Rebuild O-Ring Kit, see NMB2070.

Brake fluid should be replaced every 2 years, more often if you track your MINI.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

 

A high-performance Big Brake Kit in RED with slotted and drilled rotors for the MINI. Designed for the street and track, this brake kit increases stopping power while greatly reducing brake fade.

This kit requires the Wilwood Front Brake lines which must be ordered separately.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and S Convertible

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible

Not compatible with the Countryman or Paceman which uses 5-lug wheels.

For the O-Ring Seal Kit to rebuild these calipers, see NMB2070.
For the 11.75" Big Brake Kit for Track use, see NMB2044.
For the Rear Brake Upgrade Kit, see NMB2055.

Most stock OEM wheels will need spacers to fit (use template below to confirm fitment before ordering - clearance will vary depending on the wheel).

This Big Brake Kit includes:

Forged Billet DynaPro 4 Piston Calipers - Stress flow forging re-aligns the metal's grain structure eliminating the stresses and interruptions to the internal grain structure. FEA generated radial transition design substantially increases resistance to deflection and caliper separation.

7816 "Q" compound Polymatrix Pads - Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.

GT Series Rotor Mounting Hats - Lightweight and strong, these hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. Black anodized finish prevents corrosion and enhances appearance.

SRP Series 12.19" Vented Iron Rotors - Adds stopping power and cooling capacity over smaller diameter OE rotors. Premium grade, long grain carbon iron provides long wear with high thermal stability and resistance to distortion. Venting and cleaning action of the holes and slots reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on rotor faces. This results in smoother engagement with improved consistency and response at the pedal. Treated with silver zinc wash, these rotors resist corrosion.

Caliper Brackets and Hardware - Aluminum mount brackets with steel threaded bolt inserts are lightweight and stong. Each bracket is CNC machined for precise fit. Grade 8 or higher and AN style nuts, bolts studs, washers, and alignment shims are included in all applicable kits.

Note: Installation of Wilwood Disc Brakes may affect the wheel offset.

CHECK BRAKE CALIPER TEMPLATE BEFORE ORDERING. Use this template to ensure compatibility with your wheels - Big Brake Kits require more space behind the spokes to clear the caliper. In some cases, spacers  may provide the necessary clearance.

For Wilwood Big Brake Kit, see NMB2041-P.

For Wilwood Big Brake Kit replacement Brake Pads, see NMB2045-P.

For Wilwood Big Brake Kit replacement rotors, see NMB2047-P.

For Wilwood Big Brake Caliper, replacement Pistons, see NMB2071.

For Wilwood Big Brake Caliper Rebuild O-Ring Kit, see NMB2070.

Brake fluid should be replaced every 2 years, more often if you track your MINI.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

 

Designed for the street and track, this Wilwood Front Big Brake kit increases stopping power while greatly reducing brake fade.

This kit requires the Wilwood Front Brake lines which must be ordered separately.

Fits the following models:

2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and S Convertible

2007-2013 R56 MINI Cooper and Cooper S Hatchback
2008-2014 R55 MINI Cooper and Cooper S Clubman
2009-2015 R57 MINI Cooper and Cooper S Convertible

Not compatible with the Countryman which uses 5-lug wheels.

For the O-Ring Seal Kit to rebuild these calipers, see NMB2070.
For the 11.75" Big Brake Kit for Track use, see NMB2044.
For the Rear Brake Upgrade Kit, see NMB2055.

Most stock OEM wheels will need spacers to fit (use template below to confirm fitment before ordering - clearance will vary depending on the wheel).

Includes:

Forged Billet DynaPro 4 Piston Calipers - Stress flow forging re-aligns the metal's grain structure eliminating the stresses and interruptions to the internal grain structure. FEA generated radial transition design substantially increases resistance to deflection and caliper separation.

7816 "Q" compound Polymatrix Pads - Operates at the lowest noise and dust level of any performance pad. Polymatrix offers high resistance to fade, long wear, and low rotor abrasion.

GT Series Rotor Mounting Hats - Lightweight and strong, these hats are specially designed for use on OE hubs without modifications or interference to the suspension or ABS components. Black anodized finish prevents corrosion and enhances appearance.

SRP Series 12.19" Vented Iron Rotors - Adds stopping power and cooling capacity over smaller diameter OE rotors. Premium grade, long grain carbon iron provides long wear with high thermal stability and resistance to distortion. Venting and cleaning action of the holes and slots reduce pad glaze, dissipate surface heat, and minimize irregular pad build-up on rotor faces. This results in smoother engagement with improved consistency and response at the pedal. Treated with silver zinc wash, these rotors resist corrosion.

Caliper Brackets and Hardware - Aluminum mount brackets with steel threaded bolt inserts are lightweight and stong. Each bracket is CNC machined for precise fit. Grade 8 or higher and AN style nuts, bolts studs, washers, and alignment shims are included in all applicable kits.

Note: Installation of Wilwood Disc Brakes may affect the wheel offset.

Matching Brake Lines (NMB2043) must be ordered separately.

CHECK BRAKE CALIPER TEMPLATE BEFORE ORDERING. Use this template to ensure compatibility with your wheels - Big Brake Kits require more space behind the spokes to clear the caliper. In some cases, spacers  may provide the necessary clearance.

Brake fluid should be replaced every 2 years.

For High Performance Brake Fluids, see the following:

For replacement Brake Fluid, see Mini Cooper Brake Fluid Pentosin DOT4.

 

For Wilwood Big Brake Kit, see NMB2041-P.

For Wilwood Big Brake Kit replacement Brake Pads, see NMB2045-P.

For Wilwood Big Brake Kit replacement rotors, see NMB2047-P.

For Wilwood Big Brake Caliper, replacement Pistons, see NMB2071.

For Wilwood Big Brake Caliper Rebuild O-Ring Kit, see NMB2070.

Loading...
Loading...
Loading...
Related Technical Articles:
Wilwood Brakes Mini Cooper
Created: December 12, 2013
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since their founding in 1977, they have developed a substantial matrix of brake components and engineering techniques that allow them to quickly and reliably create brake systems for almost any application.Wilwood em...
MINI Cooper Wilwood Brake Clearance 12.1" Instructions
Created: May 15, 2013
MINI Cooper Brake system from Wilwood can be used with a number of different wheels when this guide is used to determine clearance.
Loading...
Loading...
Loading...