998 Flat-top Piston Set. This modern piston are flat top with oil holes rather than slots behind the rings and are suitable for up to 12:1 compression. The flat top design will yield a compression of about 9.6:1 when used with a Cooper cylinder head.

This pistons replaces the original Hepolite pistons 18516KR and P20950 used on the original Coopers.

From Russell Engineering in Australia, these 998cc pistons are +.060 oversized, or 2.602" (66.10mm). These are high quality, three ring, flat top pistons. They come complete with pins and rings. Pin-height (distance from top of piston to center of wrist pin) is 1.333".

998 Flat-top Piston Set. This modern piston are flat top with oil holes rather than slots behind the rings and are suitable for up to 12:1 compression. The flat top design will yield a compression of about 9.6:1 when used with a Cooper cylinder head.

These pistons replace the original Hepolite pistons 18516KR and P20950 used on the original Coopers.

From Russell Engineering in Australia, these 998cc pistons are +.080 oversized, or 2.622" (66.60mm). These are high quality, three ring, flat top pistons. They come complete with pins and rings. Pin-height (distance from top of piston to center of wrist pin) is 1.333".

<p>
When boring a small bore engine to .080" oversize or larger, it is no longer necessary to 'notch' the block for exhaust valve clearance in order to fit a 1275 head with the standard valve sizes (1.31" intake, 1.15" exhaust).  for replacement rings use  RS-A1118-80RNGS .

998 Flat-top Piston Set. This modern piston are flat top with oil holes rather than slots behind the rings and are suitable for up to 12:1 compression. The flat top design will yield a compression of about 9.6:1 when used with a Cooper cylinder head.

This pistons replaces the original Hepolite pistons 18516KR and P20950 used on the original Coopers.

From Russell Engineering in Australia, these 998cc pistons are +.040 oversized, or 2.582" (65.58mm). These are high quality, three ring, flat top pistons. They come complete with pins and rings. Pin-height (distance from top of piston to center of wrist pin) is 1.333".

998 Flat-top Piston Set.   This modern piston are flat top with oil holes rather than slots behind the rings and are suitable for up to 12:1 compression. The flat top design will yield a compression of about 9.6:1 when used with a Cooper cylinder head.

This pistons replaces the original Hepolite pistons 18516KR and P20950 used on the original Coopers.

From Russell Engineering in Australia, these 998cc pistons are +.020 oversized, or 2.562" (65.08mm). These are high quality, three ring, flat top pistons. They come complete with pins and rings. Pin-height (distance from top of piston to center of wrist pin) is 1.333".