Fits the following models:

2011-2016 R60 MINI Cooper and Cooper S Countryman (including ALL4)
2013-2016 R61 MINI Cooper and Cooper S  Paceman (including ALL4)

Front rotors are 294 x 22mm for Cooper and 307 x 24mm for Cooper S, and 280 x 10mm for rears on both models.

Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

Select Model and Position.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

Tightening torque
Front caliper carrier to steering knuckle (M12): 110 Nm (replace screws)
Front caliper to carrier guide bolts:  35 Nm (replace screws)
Front rotor to hub (M10): 27 Nm (replace screws)

Rear caliper carrier to wheel carrier (M10)  65 Nm (replace screws)
Rear caliper to carrier guide bolts:  35 Nm (replace screws)
Rear rotor to hub (M10):  27 Nm (replace screws)

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Fits the following models:

2011-2016 R60 MINI Cooper and Cooper S Countryman (including ALL4)
2013-2016 R61 MINI Cooper and Cooper S Paceman (including ALL4)

Rear rotors are 280 x 10mm for both models.

Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

Tightening torque
Rear caliper carrier to wheel carrier (M10)  65 Nm (replace screws)
Rear caliper to carrier guide bolts:  35 Nm (replace screws)
Rear rotor to hub (M10):  27 Nm (replace screws)

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Fits the following models:

2011-2016 R60 MINI Cooper Countryman (including ALL4)
2013-2016 R61 MINI Cooper Paceman (including ALL4)

Front rotors are 294 x 22mm for Cooper.

Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

Tightening torque
Front caliper carrier to steering knuckle (M12): 110 Nm (replace screws)
Front caliper to carrier guide bolts:  35 Nm (replace screws)
Front rotor to hub (M10): 27 Nm (replace screws)

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Fits the following Cooper S models:

2011-2016 R60 MINI Cooper S Countryman (including ALL4)
2013-2016 R61 MINI Cooper S Paceman (including ALL4)

Front rotors are 307 x 24mm for Cooper S.

Zimmerman replacement rotors are manufactured in Germany to exacting specifications, yielding one of the highest quality rotors available for your MINI Cooper and Cooper S.

Sold per Pair. Comes with anti-corrosion coating.

ZIMMERMANN - Quality begins with the material.

Over the last few years, an increasing number of brake discs which are not identical to the respective original part in terms of their design and function have been sold on the market. Tests have revealed that basic material specifications in particular, but also changes to tolerances result in deformations and increased cracking of brake discs.

Otto Zimmermann GmbH has been performing inertia dynamometer tests and driving tests together with TÜV NORD Mobilität GmbH & Co. KG on an ongoing basis for more than 10 years, at great financial cost. On the basis of these tests, we are able to offer the free spare parts market spare parts of the same quality.

Zimmermann brake discs are "spare parts of the same quality" as original brake discs. The third-country brake discs tested by TÜV NORD do not meet this claim.

In all the brake discs tested, third-country products break considerably more quickly. The Zimmermann brake disc and the original product therefore have a significantly longer life expectancy.

The thermo-mechanical deformation is identical for the Zimmermann brake disc and the original brake disc. The third-country brake disc falls significantly below this level with respect to virtually all the criteria tested.

[ ] Made in Germany in conformity with DIN EN ISO 9001:2000
[ ] Consistently high product quality meeting the very highest quality standards
[ ] Responsible awarness of your safety
[ ] Reliability
[ ] In-house development
[ ] Permanent program maintenance and extension

Tightening torque
Front caliper carrier to steering knuckle (M12): 110 Nm (replace screws)
Front caliper to carrier guide bolts:  35 Nm (replace screws)
Front rotor to hub (M10): 27 Nm (replace screws)

MINI recommends the brake fluid be replaced every 2 years. See Mini Cooper Brake Fluid Pentosin DOT4 for replacement brake fluid.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Zimmerman Cross-Drilled FRONT 307 x 24 mm rotors are manufactured in Germany to exceptional standards of quality. One Pair of Front Rotors.

Fits the following Cooper S models:

2011-2016 R60 MINI Cooper S Countryman (including ALL4)
2013-2016 R61 MINI Cooper S Paceman (including ALL4)

Front rotors are 307 x 24mm for Cooper S.

BMW performance cars are famed for the quality of their brakes, but many owners want to go even further with their cars. Zimmerman rotors are made for exceptional stopping power on BMW MINISs.

Serious drivers and car enthusiasts know that braking is just as important as accelerating in getting around the track or down a windy road. Cross-drilled rotors allow heat to escape more quickly than conventional rotors, resisting fading and uneven wear. A car with great rotors will stay effective on the track or on the street much longer than a car with conventional brakes.

Other cross-drilled brake rotors are often not heat-treated after drilling, leaving sharp edges that decrease brake pad life. Zimmerman cross-drilled rotors feature holes with edges that increase pad life and prevent cracking of the rotors. The holes also provide a visual wear inspection for the life of the rotor.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best

Zimmerman Cross-Drilled REAR 280 x 10 mm rotors are manufactured in Germany to exceptional standards of quality. One Pair of Front Rotors.

Fits the following models:

2011-2016 R60 MINI Cooper and Cooper S Countryman (including ALL4)
2013-2016 R61 MINI Cooper and Cooper S Paceman (including ALL4)

BMW performance cars are famed for the quality of their brakes, but many owners want to go even further with their cars. Zimmerman rotors are made for exceptional stopping power on BMW MINISs.

Serious drivers and car enthusiasts know that braking is just as important as accelerating in getting around the track or down a windy road. Cross-drilled rotors allow heat to escape more quickly than conventional rotors, resisting fading and uneven wear. A car with great rotors will stay effective on the track or on the street much longer than a car with conventional brakes.

Other cross-drilled brake rotors are often not heat-treated after drilling, leaving sharp edges that decrease brake pad life. Zimmerman cross-drilled rotors feature holes with edges that increase pad life and prevent cracking of the rotors. The holes also provide a visual wear inspection for the life of the rotor.

Brake fluid should be replaced every 2 years, more often if you track your Mini.

For High Performance Brake Fluids, see the following:

• Ate Performance Brake Fluid - Very Good
• Motul Racing Brake Fluid - Better
• Castrol React SRF Brake Fluid - Best