× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
Refurbished Turbocharger replacement from JMTC for a reliable bolt-on solution! Save $$$ over a new unit with this refurbished unit.
Turbo Replacement JMTC Refurbished Gen3 MINI Cooper S F54 F56 F55 F57 F60

Turbo Replacement JMTC Refurbished Gen3 MINI Cooper S F54 F56 F55 F57 F60

Turbo Replacement JMTC Refurbished Gen3 MINI Cooper S F54 F56 F55 F57 F60

Turbo Replacement JMTC Refurbished Gen3 MINI Cooper S F54 F56 F55 F57 F60

Turbo Replacement JMTC Refurbished Gen3 MINI Cooper S F54 F56 F55 F57 F60
Selected: Cooper S Replacement Refurbished pre-facelift
Part No: G3NME2805R
$1570.99
Qty:
Specially Priced. Discounts Do Not Apply.
This Item has a $400.00 core charge.
Fits the following:
MINI (2002-Current)

Refurbished Turbocharger replacement from JMTC for a reliable bolt-on solution! Save $$$ over a new unit with this refurbished unit.

Fits the Cooper S models with the B48/B46 engines and the following production dates:

04/2013-03/2018 F56 MINI Cooper S Hardtop
09/2013-02/2018 F55 MINI Cooper S Hardtop 4-Door
11/2014-02/2018 F57 MINI Cooper S Convertible
11/2014-07/2019 F54 MINI Cooper S Clubman
11/2015-06/2019 F60 MINI Cooper S Countryman

For Turbos to fit the Cooper non-S models, see MINI Cooper Turbo JM Gen3 F56 F55 F57 F60 F54

Features:

  • Billet compressor
  • Extended tip compressor wheel
  • High temperature alloy turbine housing
  • Twin scroll turbine housing
  • Water cooled cartridge 

Turbo Replacement

Refurbished Turbocharger from Mitsubishi OEM original manufacture.  Guaranteed exact fit replacement for the original turbocharger that came in your MINI. Please make sure to check the engine type before ordering - there are 2 engine types with the same name and this turbo only fits the engine with the 2 port head.

If the new actuator is retain/used, the vehicle will need to be taken to the dealer or a shop with the BMW tools to have the wastegate learning done. Otherwise dash will display a check engine light or service engine light.

Refurbished Turbochargers

JMTC Turbocharger rebuilds get a complete overhaul including cleaning and/or replacement of all internal components that could have been worn or damaged due to mechanical issues with the engine or exhaust system.  Such items that can be damaged are Turbine Shaft Bearings, Thrust bearings, pressure seals, cartridge, or end housings.  Any components that do not meet our stringent standards will be replaced.  Some parts that are damaged beyond repair may be replaced with quality JMTC manufactured parts but will retain JMTC's full warranty. 

Refurbished turbos do not come with a wastegate actuator. If you need a wastegate actuator select the new Turbo or purchase a new wastegate actuator. 

Although the refurbished units are thoroughly cleaned, if you are concerned with superficial cosmetic scratches, dents, and other imperfections from previous use, choose the new units.

NOTES:

  • If you are replacing a failed turbo, correct any and all issues that contributed to the failure of the turbo.
  • Prime the Turbo when installing
  • Perform an oil change just before servicing the turbo, and again shortly after.
  • Do not re-use an old Oil Supply Line - install a NEW line!
  • Refurbish both catalytic converters to eliminate any unusual back pressure built up from years and miles of contamination.  This is especially important if you've had a catastrophic turbo failure that dumped oil into the exhaust. Unusual backpressure will severely shorten the life of any new turbo.
  • We recommend oil changes at around 5k miles interval to keep the oil fresh.
  • Let the engine idle for a couple minutes after a long or hard drive to cool the turbo and prevent the oil from coking in the bearings.
  • ECU Tuning is not required but will allow the turbo and engine to reach their full potential.

For best results JMTC recommends getting your OEM catalytic converter refurbished or getting one of the high flow downpipes to insure that the exhaust flows as well or better than it did when it was new before installing your new turbo upgrade. Also install new oil lines and one step colder spark plugs.

Select from:

  • Standard replacement or upgraded Super Turbo
  • New or refurbished
  • Pre or post facelift

Turbo Compatibility

Turbo compatibility is based on engine types. The engine type changed with the 2019 model year where all models were 'refreshed' or received a 'facelift'. These updated models are called the LCI (Life Cycle Impulse) models or the post facelift models. Below are the changes with the engine designations:

Cooper non-S models with the 1.5 liter 3-cylinder engines:
pre-facelift up thru 2018 model years - B38/B36 engine
post facelift from 2019 model year - B36C engine

Cooper S models with the 2.0 4-cylinder engines:
pre-facelift up thru 2018 model years - B48 / B46 engine
post facelift from 2019 model year - B46C engine

JCW models with the 2.0 4-cylinder engine:
pre-facelift up thru 2018 model year - B48 engine
post facelift from 2019 for F56 Hardtop and F57 Convertible - B46D engine
post facelift from 2019 model year for F54 Clubman and F60 Countryman - B48E engine

 
 
Question:
Is this a direct replacement for BMW/MINI part number 11-65-8-626-636?
Answer:
Yes, the G3NME2805R is a lower-cost replacement alternative to the factory unit 11-65-8-626-636.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...