Performance Clutch Upgrade kits to match your application from performance street to full race!

Fits the following Cooper S models with the N14 engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

Images shown are approximations and not the actual products.

Stage 1 Cooper S Performance Clutch Kit offers a nice upgrade from the factory setup with stock-like daily drivability and very good wear characteristics. Whether you are looking for something 'more durable' or 'better than stock', or a nice performance upgrade, the Stage 1 kit is a great fit.  

Features high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque solid hub disc assembly, and bearing.

Stage 2 Performance Clutch Kit for the MINI is a perfect upgrade for mild to moderately modified and power added engines. (Also good for stock power levels and spririted driving when good daily drivability and extremely long life are the goal.) Stock-like daily drivability and EXCELLENT wear characteristics. For Street, Drag, Pulling, Autocross. 

Features high clamp pressure plate, pure Kevlar friction material and high torque rigid hub disc assembly, bearing and tool kit.

Stage 2 PLUS Performance Clutch Kit for the MINI is a perfect upgrade for all modified engines making more torque than the stage 2 can support. Maintains stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. For Street, Drag, Road Race, Rallye, Pulling, Autocross. 

Features high clamp pressure plate, composite multi-friction carbon-kevlar material, high torque rigid hub disc assembly, bearing and tool kit.

Stage 3 PLUS Performance Clutch Kit for the MINI is a nice upgrade for heavily modified street and race engines making more torque than the Stage 3 can support. Offers good daily drivability and better manageability than the stage 3, with even better wear characteristics. For Street, Drag, Drift, Road Race, Pulling. 

Features high clamp pressure plate, full-faced carbon metallic friction, high torque rigid hub disc assembly, bearing and tool kit.

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature clamp loads from 20%-40% higher than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

For the factory replacement Flywheel Bolts, see G2NMG7603.

Pressure Plate mounting bolts torque specs:

Flywheel mounting bolts torque specs:

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

SPEC LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.

Whether you are looking for something 'more durable' or 'better than stock', or a nice performance upgrade, the Stage 1 kit with the unsprung solid hub clutch disc is a great fit.

Image shown is an approximation and not the actual product.

Fits the following Cooper S models with the 2.0 liter 4 cylinder engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

Image shown is an approximation and not the actual product.

Stage 1 Performance Clutch Upgrade kit features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. Best for street and many track/off-road applications.

Stage 1 Cooper S Performance Clutch Kit offers a nice upgrade from the factory setup with stock-like daily drivability and very good wear characteristics. For Street, Drag, Drift, Road Race, Rallye, Pulling, Autocross.

Features high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque solid hub disc assembly, and bearing.

INCLUDES

[ ] High clamp pressure plate 
[ ] Steel-backed and multi-compound woven organic material
[ ] High torque solid hub disc assembly

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature higher clamp loads than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

Always replace the Flywheel Bolts when the flywheel is removed.

Pressure Plate mounting bolts torque specs:

Flywheel mounting bolts torque specs:

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

SPEC LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.

Stage 2 Performance Clutch Upgrade kit! Features an solid hub segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. Heat treated components for strength and durability. Best for street, drag, pulling and autocross.

Image shown is an approximation and not the actual product.

Fits the following Cooper S models with the 2.0 liter 4 cylinder engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

Image shown is an approximation and not the actual product.

Stage 2 Performance Clutch Kit for the MINI is a perfect upgrade for mild to moderately modified and power added engines. (Also good for stock power levels and spririted driving when good daily drivability and extremely long life are the goal.) Stock-like daily drivability and EXCELLENT wear characteristics. For Street, Drag, Pulling, Autocross.

Features high clamp pressure plate, pure Kevlar friction material and high torque rigid hub disc assembly, and bearing.

INCLUDES

[ ] High clamp pressure plate 
[ ] Pure Kevlar friction material
[ ] High torque solid hub disc assembly 

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature higher clamp loads than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

Always replace the flywheel bolts once the flywheel is removed - here are the MINI factory replacement Flywheel Bolts.

Pressure Plate mounting bolts torque specs:

Flywheel mounting bolts torque specs:

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.

Stage 2 PLUS Performance Clutch Upgrade kit! Features an unsprung solid hub multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. Heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rallye and drift.

Image shown is an approximation and not the actual product.

Fits the following Cooper S models with the 2.0 liter 4 cylinder engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

Stage 2 PLUS Performance Clutch Kit for the MINI is a perfect upgrade for all modified engines making more torque than the stage 2 can support. Maintains stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. For Street, Drag, Road Race, Rallye, Pulling, Autocross.

INCLUDES

[ ] High clamp pressure plate 
[ ] Hybrid Kevlar and Carbon-Graphite friction material
[ ] High torque solid hub and disc assembly 

Features high clamp pressure plate, composite multi-friction carbon-kevlar material, high torque rigid hub disc assembly, and bearing.

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature higher clamp loads than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

Always replace the flywheel bolts once the flywheel is removed - here are the MINI factory replacement Flywheel Bolts.

Pressure Plate mounting bolts torque specs:

Flywheel mounting bolts torque specs:

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.

Stage 3 PLUS Performance Clutch Kit with an unsprung solid hub clutch disc for the MINI is a serious upgrade for heavily modified street and race engines making more torque than the Stage 3 can support. Offers good daily drivability and better manageability than the stage 3, with even better wear characteristics. For Street, Drag, Drift, Road Race, Pulling.

Image shown is an approximation and not the actual product.

Fits the following Cooper S models with the 2.0 liter 4 cylinder engine:

2014-2019 F56 MINI Cooper S Hardtop
2015-2019 F55 MINI Cooper S Hardtop 4-Door
2016-2019 F57 MINI Cooper S Convertible
2016-2019 F54 MINI Cooper S Clubman
2017-2019 F60 MINI Cooper S Countryman

STAGE 3+

The flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The solid hub clutch disc is heat treated for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift.

Features high clamp pressure plate, Carbon semi-metallic friction metarial, high torque sprung hub disc assembly, and bearing.

Spec High Clamp Load Pressure Plates are standard with all performance kits. These plates can feature clamp loads from 20%-40% higher than original equipment and have a very reasonable pedal requirement. The exclusive 360 degree pivot technology assures a perfectly even lift and disc clamp, maximized leverage, more consistent clamp load and minimized wear.

Pressure Plate mounting bolts torque specs:

Flywheel mounting bolts torque specs:

INSTALL NOTES

Unless using a new flywheel provided by SPEC, existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 450 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or speed shifting. * FAILURE TO EXECUTE EACH OF THE ABOVE WILL HINDER CLUTCH PERFORMANCE AND VOID ALL WARRANTY!!!

Unless otherwise instructed by written notice from SPEC, follow manufacturer’s instructions when installing clutch and flywheel products. SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times replaced. SPEC will not warrant any component failure due to install error.

SPEC LIMITED WARRANTY

S.P.E.C., Inc warrants all products to be free of defects in materials and workmanship for normal use and service up to 120 days after retail purchase. SPEC reserves the right to examine any part returned for warranty claim to determine whether a defect in materials or workmanship exists in such product. SPEC liability is limited to repairing, replacing or crediting towards other product, and credits will not exceed the invoice total for the parts. Labor and storage charges are not products of SPEC and, therefore, will not be reimbursed for any reason. Final determination of the condition and suitability of the parts for uses contemplated by the buyer is a sole responsibility of the buyer. SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty. There are no warranties expressed or implied beyond those set forth above.